Search results for query: *

@Gwelo: No, the ports are just drilled. The first 3mm are Ø3mm, the last 0.75mm are ø2mm. A barrel with ports drilled and threaded to M3 will probably be the best solution. I hope that is what she tried to convey. I made a new variant a couple of days ago. Ø6x10mm brass rod milled down to...

I measured W x H on all the B96/B98 magazines I have, and here is what I found: Single shot mag - W 6.95 x H 7.13 5-shot mag no1 - W 6.95 x H 7.07 5-shot mag no2 - W 6,92 x H 7.11 5-shot mag no3 - W 6.92 x H 7.09 5-shot mag no4 - W 6.90 x H 7.11 5-shot mag no5 - W 6.92 x H 7.08

Then my "rubber cord" approach is a little improved. From the factory the compensator holes are drilled to ø3mm a bit into the barrel wall, then the last ~0.5mm is drilled to ø2mm. That means there's a little shoulder at the bottom of the comp holes. Take a 3mm rubber cord and cut off three...

A bit disappointing that they don't respond to direct contact, but it may indicate that the associated user manual and parts list are not ready yet. I have always gotten a response back when I have contacted them directly in the past. I will try through a couple of acquaintances.

The previous model (LP5) had a barrel and cover without the 3 comp holes on top. However, a difference in barrel and cover length between the LP5 and LP50 means that the 1/2-20 adapter does not fit directly, but 5 pcs. ø6x3 o-rings between the 1/2-20 adapter and the barrel muzzle fixes that...

I guess you kan use 5mm or 6mm plastic beads also, but I didn't have anything like that lying around. I haven't got to the point where I can measure the noise yet, it's a very rainy weather in my area the moment. My Steyrs also have slots in the bottom of the barrel shroud, but the gap between...

Now I've found some time find a way to seal the compensator holes in the barrel on the LP50. You need a 6mm (or 1/4") rubber cord and three Steyr LP Weaver rails (or similar ex. 3D printed rails). Cut the rubber cord (preferably NBR90, but NBR70 will also do) in pieces of 13mm (1/2") length and...

Hope this can help you. The dimensions are metric. Unfortunately, I don't have an isometric drawing, but google images of the magazine and you'll see better what it looks like at the ends with angles and small details.

Sorry I forgot to mention it, but of course, a worn magazine may be the cause of unreliable function.

Before you send it away for service/repair, there's three things you can do: 1. Check muzzle velocity. It should be around 135ms (~445fps) with 0,53g (8,2gr) pellets. If significantly lower than this (115ms or lower), the hammer spring might be worn and/or the regulator might need a...

I think I have dimensional drawings of the 5-shot Aeron B96/B98 magazine, if that helps. But on the other hand, if I get sued for sharing this information, I might not have those drawings after all... 😖

Most 10m PCP air pistols come with two easily swappable air cylinders. It usually takes around 50-60 pumps to fill one cylinder from 80 to 200 bars, and that will give you in the ball park of 140 shots pr. cylinder. (y)

I don't really know what it is about the Hurricane and the Tempest, but I like them. I have five of them in total. They are heavy to cock, they recoil violently (for an air pistol) and are difficult to shoot accurately, and they are not very pretty, although not exactly ugly either. But they...

I let these three shine along with the sun today. ☀️

I guess this is empirical knowledge, you don't get there without having lived for a while and had a pragmatic approach to life. (y)

That is a good solution, but as you say, from M6 and up. (y) Unfortunately, the screws I'd like to secure is M3 and M4.

I have tried Vibra-Tite, but it didn't perform very well. I possibly got hold of an old expired tube.

Hi. Can anyone tell me what kind of pre-applied threadlocker e.g. Traxxas uses on their screws? That holds tight but doesn't lock up completely, and stays flexible and makes adjustments possible over time? It doesn't look like LocTite supplies any of this type of threadlocker, but clearly...

Moved the 2x20 scope over from the HW44 to the P85 today. Shooting rested at 15 meters, that's about the longest I can get within the fences on the cabin property. I'm a newbie when it comes to optics on handguns, and so far I prefer scopes over red dots by a good margin. Probably because so far...

You have a good eye for details. (y) I was in a little hurry when I made this so there was no testing and trying during the making. It is possible I go for just one fastening screw on the next version, it nevertheless pinches very well to the dove tail rail. The screws I have used are a kind of...