Search results for query: *

I picked up a metric o-ring gauge from McMaster-Carr a little over a year ago and it has proved to be quite useful. It really takes the guess work out of sizing o-rings. Here's the gauge I bought: https://www.mcmaster.com/9440K43/ It's not cheap ($26). However, it has always proven to be...

I am curious which brand bipod rail and mounting method did you guys use. Edgun West it seems sells them and will do the mounting but the shipping will be a deal breaker.

A few weeks back there were several posts on the "on sale" Coltri MCH6 compressors from Nuvair. After a bit of contemplation, I decided to order one. The unit arrived at my local Fedex freight yard with a few days after ordering. I decided to get the unit at the freight yard with my pickup...

Has anyone ever seen a M18-1.5 Male (Asia tank) to 7/8-14 Female (Standard SCBA tank) adapter? I found M18-1.5 Female to 7/8-14 Male adapters but not the reverse. This would allow one to use an SCBA valve of their choice with a CGA 347 connection.

In theory, the EDGun, Taipan and Vulcan/Uragán fill probes are the same. However, my Uragan probe will not fit in my EDgun R5M and the Taipan just makes it. The way I discovered this is the probe and foster adapter that came with the R5M did not come with a delrin or doughty washer. Rather...

I recently purchased an EDgun R5M rifle and noted my barrel was out of alignment. This was documented here: https://www.airgunnation.com/topic/edgun-r5m-questions/ Several other folks responded they had seen the same thing with their rifles. I'm terrible at eyeballing alignment so I put...

I saw a few folks ordered these for their Edgun products. How did they work out?

I always wanted to try an Edgun and the sale at the end of the year pushed me over the line. The rifle arrived yesterday and I'm very impressed. I am not sure where Ed is getting his wood from but there is a lot of figure in the Walnut. The only things I would suggest at this point is better...

I had this unit on order since early July. My plan was to get a 22 in long but it looks like they are no longer available so I settled for a regular in 22. My stock is beech and appear to be flawless. How can I tell which brand barrel it is? I suspect it is an LW based on internet noise. ...

I've seen several discussions in this forum on folks polishing their airgun barrels using JB paste products. JB has two paste products (bore cleaning and bore bite). Which one are folks using? 

I have had a .25 Uragan on order for over a month and the vendor is telling me it's coming soon. What seems to be the best pellet with the out of the box tuning? Also, has anyone had luck with the JSB Exaxt King Heavy Diablo MKII 33.95gr.? 

Does anyone know offhand the size of the o-rings used on the end caps of the Tuxing gold filter? Yeah I know there are folks all over AliExpress selling two for just over $7 but I figured on picking up maybe 20. I found more economical sources but the size is a concern. The best I can tell...

The pressure gauge on my Yong Heng compressor started to go south near the end of my last top off. It no longer returns to zero and the needle vibrates quite a bit when it is nearing 4300 psi. I used to think that all of these gauges were glycerin filled to dampen needle vibration. Either my...

My Yong Heng is a few months old and today blew the connection seal on the tube coming off the top of the high pressure cylinder. The pump reached 4200 PSI and stopped pressurizing after I did a purge. I could feel air rushing out of the fitting. The fitting seal is pretty interesting. ...

A month back I purchased a Marauder Pistol. The magazine fit is super tight and requires a bit of tapping with a heavy tool to get it out. Has anyone else experienced this? I called Crosman and they sent me a new magazine. It was the same deal. The problem is the breech lip in the magazine...

Pictured below is the filter I setup for my SCBA bottle filling using the Yong Heng compressor. CONSTRUCTION My filter setup consists of two Tux filters in a vertical inline configuration. The bottom section is a standard fiber filter and the top one contains the purification media. Both...

I just received a new Yong Heng compressor off of Ebay and it appears the documentation has been updated. The section of the manual dealing with lubrication states to use ISO VG46, AW46. However, the next page has an underlined recommendation to use MOBIL 827/829. I guessing this is Mobil's...