Search results for query: *

thank you friend I understand you!

I'm glad for you, you finally taught her how to shoot. It turns out that my conclusions that the barrel design with a 14mm liner is too thin and unstable for a .357 caliber is correct. Get a carbon tube and try it too. We ask you to take a photo of the end of the barrel as you secured it.

Thank you

Can you tell me what size is suitable for a .357 caliber? 20X14X100? it will be interesting to try

Но честный ответ на этот вопрос, вероятно, является проблемой. My next adventure is stripping the internal thread in the part, which is screwed into the barrel shroud, onto which the "Compensator fixed" silencer is then screwed on. I asked Huma for help in buying a damaged part, they promised...

After polishing, like yours, the lead on the patches became less, but I went further and cut the end of the barrel and re-formed a chamfer. In fact, these liners are not as well made as is commonly believed. but this is not their main problem. In my opinion, the problem of a terrible grouping in...

oh be careful friend. This set is almost crystal. do not use force when working with it. yes it is significantly different from other calibers. After about 1000 shots, in the end, I wound the teflon tape on the liner, after which it barely got into the casing. At 50 meters, groups of 50-60 mm...

I was doing more work with mine. In addition to polishing, I also tried many options for liner gaskets to reduce the vibrations of the liner inside the casing when fired. I did not see a noticeable improvement. I think the problem with .35 is the instability of the liner system this long. I have...

a barrel 800 mm long and 14 mm in diameter and if it is not monolithic yet ... whoever teaches it to assemble groups will be a genius

I also received such a kit in October. I have the same picture of ballistic horror. horizontal mortar. a sheet of A4 paper here is his group. I was already desperate and put this strange fantasy of FX designers away into the closet. I got a 9mm blank, which showed good groups, but it is 700mm...

I must have looked like a pouty turkey. there are no groups. ballistic chaos. There were some questions. With what force should the liner be tightened in the casing? what speed gathers dense groups in this caliber? Tried on 260 and 275 the results are terrible. maybe it's about setting up...

Thank you all. I really appreciate the humor. So I did the following - I drilled a blind hole in the lock screw. inserted a brass bar there. then he took a tool for a tractor and crushed a brass bar with it in a previously prepared threaded hole in a piece of metal lying in the garage. then...

I admit, I tightened it up, but at the same time I was friends with my head, not too much. I saw that the metal of the transfer port of this barrel is soft like plasticine, unlike barrels of other calibers, but I did not expect that so ...

Hello dear community. I would like to share with you a short experience with the FX Impact Barrel Kit Smooth Twist X Superior .35 caliber. I am writing here for the first time, and English is not my native language, so I ask you not to judge strictly about possible mistakes. So I recently got a...

1