Search results for query: *

NP I am NOT that hungry yet...........

Their back again, I bought 2500rds and almost out of ammo again......lol

MT Lion, Desert Sheep, Deer, Ellk, Beaver, Muskrat, Rabbit, Squirrel, in this order.

You might want to look here: One of the best mold makers around, https://noebulletmolds.com/site/product-category/bullet-moulds/308-311/

Oregon has all 3 deer species, Mule, Blacktail, Whitetail

Nevada = BLM Land = 86% open to the public for use, of 110,577 square miles of this state, what's not to like? and has 4 seasons per year. YMMV

Nice Western Diamondback Bell worm, looks like it just shed, very bright patterns.

Get your grab an go DragonFly II 22 caliber rifle, grab the rifle along with a small can of pellets and GO have fun, nothing else is needed.......... There lots more horsepower under the hood of a DF II than any other pumper, you just have to tune for it. YMMV

Thanks Hpp The biggest gains I have found so far is making a new top seal valve and having the nose of this seal fit .005" under the diameter, (I reamed a straight hole dia) and full length just level with the front of the valve head, with a .145 dia, for all hole sizes, except the bbl, which is...

HPP Thanks, I guess I'll order a couple of those shoulder bolts, I hate ordering from M&C as their shipping rates kill ya.............on small orders, Did you standardize the hole diameters on all 3 parts? Find the largest hole size then ream the other parts the same Dia etc. I found quite a...

HPP Did you have to relieve the wood inside the forearm to fit?

OS Go to here: https://www.gatewaytoairguns.org/GTA/index.php?topic=195725.320 post# 324, is where I start documenting the process of what I did. You have 2 limiting factors, which ever comes first, 1. Hitting the valve head, 2. Blocking the air intake hole in the pressure tube with the pump...

Hpp Have you adjusted the pump rod head out to the max length and NOT hit the valve head?

I am If it was me, I would mike for the largest hole diameter/size and then fit everything else to that largest hole Dia/size, it will reduce slop, and should make for a smoother operation, etc.

There is a lot more Horse power under this hood, if you care to carefully tune for it. Here is some of the latest test. Test L1 L2 L3 L4 1= 272 - 252-232-295 2= 351 - 377-354-433 3= 436 - 426-429-439 4= 482 - 465-459-457 5= 511 - 495-482-495 6= 541 - 531-501-511 7= 577 -...

Make you own pellet sizer, I made one from a LYMAN 45 lube sizer, it can reduce or expand the head size and at the same time reduce or expand the pellet skirt size with one stroke of the handle. I also can take 22 caliber pellets and resize them to 20 cal for my 4 Dan rifles. You can also take...

There is also a cam cut into the main pump rod handle, with a roller cam middle pivot screw, of the forearm, it is buried inside the forearm wooden handle, what it does, I am not sure. This cam doesn't move or roll in the cut out space, on the main steel pump handle rod. It is very roughly...

On my DF II, 22 cal, there is flat washers between the parts, on a straight pin. There is 4 small flat washers, one washer on each side of the main pivot rod and another pair next to the split end part of the pivot arm that goes to the pump arm. Just like the 2nd photo up shows, a washer between...

Iron sights or scoped?

OS Here are the Miked dimensions from my DF II 22 cal, Ser # 15527J, Large head size = .147" x .138" small end diameter x .712" long and .535" capture length. I lost my "C" clip lock off the small end after about 500-600 shots and had to get a new one from a parts house in Reno, NV. I have...