Search results for query: *

N2stuff, what tool did you use to cutout for the gauge and hammer?

The hammer adjustment is basically a nut threaded in to the hole. I ordered another one from FX for about 13.00. I'm gonna set my hammer pressure then thread the second nut in behind it and snug it down. That should keep it from backing out again. 

By the way, if I decide to get the Huma regulator, what should I start my pressure at? 

Yep, I have the synthetic stock so I'm not worried about damaging the stock. I'll probably get my cousin to do the cutout and just leave it in all of the time. 

I have never checked the actual regulator pressure. I'm considering buying a Huma gauge and putting it in the bleed hole. But the temperature should be comparable I got it in the fall and yesterday it was 70ish degrees here in mid TN

I pulled the set screws on the barrel The indentation looks to be lined up. When I checked the fps I started with it backed out some. It was in the high 700s so I turn it in till it maxed out and started dropping again. Then backed it off about one turn. I think my average was about 845 when I...

I did lube the liner. I think I'll replace the oring anyway, been watching a few videos this morning and I may do it this evening when I get back home. It's supposed to rain tonight anyway. 

I have not had the air tube loosened. I have considered putting in a Huma regulator because of this. The only other issue I have had was installing the STX liner. It seems FX used entirely to much locktite on the shroud. Between in my opinion to much heat and torque in the shroud to get it...

I should have printed all of this. I think it finally settled down to 24. It was swinging wildly at first from high 790 to about 830or so. I even switched barrel liners to see if the ST liner would be better. 

No, I can only achieve 856 now. That was my highest speed this evening.. My average was 846 I think. 

My Wildcat is loosing fps, it went from 870ish down to the 820s. I checked the hammer tension adjustment and it is very loose. I have run it over a Chrony and the best I can get now with STX liner and JSB 25.39s is 845ish. I checked the spring and it seems ok, so what are other things I may have...

888.88

I have done a little searching here and on Google looking for a slow fill adapter probe for my FX Wildcat. Someone mentioned you can find one with threads on the inside for a grub screw to slow down air flow. Does anyone have any info or a link? 

888.88

888.88

Can you attach an air venturi desiccant rmoisture filter to the intake?

888.88

88.88

About a month ago, Walmart here out their Beeman's on sale So I figured they were going all Crossman. But they still carry Umarex pistols, so maybe they will pick up their rifles?