Search results for query: *

Where did you purchase the 20 MOA rail?

where do you purchase a 20MOA rail.

Anybody out there who has ordered the new Zulus heard anything about a shipping date. Mine is on order from early December but have heard nothing from Arken.

is the lrf model still available with the 25% off?

On your unit, with the lrf, will the ballistic calculator show a corrected impact point on the view screen?

Ive been looking to purchase this unit but the supply seems to have dried up. Anyone know why?

thank you, just what i was asking for. Im also shooting NSA, they are within 30 miles of me. If you have a shot group with the above set up at 50 or 100 yards I would appreciate a picture, thanks again

I would appreciate a (recipe) settings for my M3 so I can shoot slugs without spending lots of time doing the trial and error. I have a stock .25 cal M3 with 700mm barrel. really dont want to change barrels or mess with hammers etc. I simply want to re-set the regulators, and if necessary re...

thank you and I did find the 006's in a rebuild kit. If you are ever in the St. Louis area stop by for a beer

Thanks Revoman for the schematic. Somehow my #37 assembly only had 1 white O-ring and it was in contact with the #112 retainer plate. There was no "inside" or 2nd white o-ring when I removed, disassembled and cleaned the #37 Vent Assembly. Any idea where I can obtain the two white O-rings?

My F10 is now bleeding air from the very small vent hole shown in the attached photo. I have disassembled the unit, cleaned the two ball bearings, spring and reinstalled the white O-ring. In order to do all that I had to remove the block (manifold)and the backing plate, that is immediately...

thanks for the update, I used a 24mm box end, clamped the block into my bench vice (with some soft grip protectors) and it came off with no problem. I received the new Orings yesterday and will be installing this weekend.

Moses888 cancel, I found him on the forum

Moses888, who is the person in your message that's has O ring kits "yenniedn" didn't get me a hit when I googled?

Yes I ordered extra plug O-rings and well as extras for the one that goes between the adaptor and the block. thank you

Actually Ca_Varminter you are correct. My M1 parts list shows that part as the O-ring 2.2x1 NBR 70. Guess Ill just wait to see what FX sends. thanks for your help

yes but its not rubber, its some kind of plastic. I watched one of Earnest Rowe's videos and he said that he has had to replace a few of them and they are not rubber, they are some kind of hard plastic. I have a couple on order from FX they should arrive this week. I removed my old plastic...

Gerry52, when you replaced the brass plug, did you screw it in until it bottomed out?

I did a lot of bubble tests trying to ensure it was the brass plug, im 99% sure it is. What size socket fits the bottle adaptor?

My older impact that I have added a power plenum to has developed an unusual leak, so before I tear in to it I thought Id post a message for any do's or don'ts. The leak is around the front brass adaptor that plugs a machined hole through trigger block (ive located it at the end of the phillips...