Search results for query: *

Krytox is an extremely good lubricant that can be used with all types of airguns. It's not cheap, but highly recommended. You will have to do a little research to understand why it's so expensive, but a very small amount goes a long way. I use it for all of my airguns.

Just to be clear, if you pull the Notos apart & polish the adjustment screw tips, polish the sear (esp. the angled portion that holds the hammer back) the hammer itself is the key (esp. the lip) & side contact points, add krytox lube you will be amazed @how nice the trigger can become. Always...

For finishing off the trigger, (after previously mentioned areas) try polishing the lip of the hammer, and the angled portion of the sear that engages the lip.

Rob I learned a lot and gained a new perspective. Thanks for taking the time. Keep it coming.

You can always query the classifieds for a cheap one but ask about accuracy before you buy.

Curious minds want to know!

What is your specific problem?

This is one example of went you DON'T want to be a fly on the wall.

Many of us learned the basics and had a blast customizing some form of Crosman leggo setup. I started with a custom shop 2400KT with 18" barrell. Swapped the tube, did a 3 screw mod for a disco valve with a sleeved p-rod poppet. Filled to 1900psi I get 20 shots @900 fps. You are right, it's all...

Thomas If I remember correctly, there are 3 small phillips screws on the right side of the handle. One is exposed and one or 2 are under the wooden grip. My guess is you forgot to install on of them under the wooden grip. Take a look.

Way to keep the family involved. Well done.

Generous offer, I'd jump on that Mr. Tweedertweek!

Another (y) for Terry and his products. Had a very early production of the 2240 slip on moderator with the thinner smooth wall. Worked great but when I tried to remove it I grabbed the body instead of using a block to knock it off. I broke it, totally my fault. I contacted him and asked if there...

Be sure the tank is completely empty before you unscrew anything.

Healthservices I totally agree with your points on refining the trigger. My PP750 trigger was reworked extensively and it is a GREAT trigger. All the tips you gave help alot, esp. polishing the lip of the hammer. Hammer spring tension is a big factor in reducing the overall pull weight. For me...

It makes this gun very quiet.

Moderator is a used TKO. It has 2 grub screws that hold it in places. Makes the gun extremely quiet, as inside livingroom friendly. I picked up a slightly longer barrel from Crosman, cut it down and shaped it to fit. There is a little incresse in the FPS, it shoots about 450 fps with RWS 7 gr Match.

Pretty good shooting on that Model 25 for 50 yards. I use the P17 & my model 25 to shoot the little metal silouttes. P17 at 20 yards and the Hatsan at 25 yards. Both are fun pistols, but I favor the P17 because there is no recoil. You can pratice your trigger pull with the P17 by lifting the...

For a fairly safe, quiet and cheap "garage" trap get a sack of rubber mulch @ Walmart and fill a cardboard box with it. 10 to 12 inches deep will stop most 177 & 22 rounds. I use duct tape across the front to keep it together a little longer. The rubber mulch dissipates the energy really well...

How hard is racking tbe 1st. shot and inst@lling the magazine? Do you know if they will come out with a lever action model of this gun? That would push me over the line to get one for sure.