Search results for query: *

I have encountered this with my Marauder. I found it to be that the cut outs for the air gauge and the trigger were not smoothed out. The O-rings get cut up when the valve body and gauge body is installed.I used a one inch 1200 grit hone and a small file to smoothen things out and put in new...

I just received 16 tins of .25 JSB's yesterday all foam up packaged, tapped up and not a mark on them.

I live by Bethel Ohio and have shooting for 5+ years out here in the country.

1945.00 US army Vietnam 

1010.10

2222.20

1123.06

908.08

1999.02

1777.77

717.92

My Bobcat mk II in .25 has 40 tin's of JSB King through it an haven't had to change the breach O-ring. I clean and lub my pellets but i use silicone lub.

The cut outs for the air gauge, the trigger slot and the air tank fill screw in have unfinished sharp edges. I had that problem and replaced the air tub just to get one that was as poorly finished as what I had. I used a small rat tail file to remove all the burrs then polished it with a 1200...

702.08

If you shot the remaining pellets out check your baffles. You may have damage one because I have done that one.

279.79

16.99

FX Bobcat is 1 in 20 and the crown can be 1 in 28 or 1 in 30 you have to check the tag on the barrel. 

Here are your O-rings for the Bobcat. Here is a list of FX Bobcat Mark II O-ring sizes, quantities needed, and the parts numbers for Maryland Metric. They do not show the O-rings for .177 or the .25 but do for the .22 and .30 for the breach. NBR 70 11354 4.0x1.5 qt. 1...

Having bought a Bobcat MK II and a Crown from them I couldn't agree with you more.