Search results for query: *

Thanks for your help, I like your barrel band set up, Ill give Heavy Impact a shout... Thanks again

I have a Daystate Wolverine 2, and I would like to install a sling. Not sure how to start, wood on the front is maybe 3/16" with the bottle on top. Is there a way to attach the hardware to the front that I'm not seeing and still have a secure sling, I would really appreciate any help out there...

I have had my Yong Heng a bit over 2 years, have not had any issues. Watch the heat, watch the oil level, pop the drain knob while running every 5 minutes or so. Take care of it and it will take care of you. Good luck...

1948.50

Hello, I would for sure add a dryer between my unit and my gun. I put the compressed air in a fireman's bottle first then from bottle to gun, less chance of water getting into your gun. I also started with a Marauder and a Yong Heng and works great..... Good luck

Thanks to all, cleaned everything from compressor to the tank, looked fairly clean when started but after a good cleaning I found quite a bit of crud in the fittings, used a little isopropyl on the fittings and just air on the hoses. Got all back together, warmed up the compressor and purged...

I will start on the hoses this mourning , and report my findings Thanks all

Foster is clean, but will try to open valve wider Thanks

Ive had my compressor for about 1 1/2 years now, it is the 220 volt auto shut off and has worked great until recently. When I turn on the compressor with hoses attached and equal pressure in my half hour tank and the compressor, the gauge on both the bottle and the compressor shoots from 2600...

I bought the Rowen loader for my wolverine 2, I was disappointed when I got it. The Wolverine version does not have the auto pop out feature, you have to manually pull the tab to open the loader, to many steps. I only use the single loader now, with a bit of a tweak.Being right handed I added a...

Blown away by amount of participation, that's a good thing.

1948.05

I started out using #46 the switched to RP, the compressor seems to run a bit cooler, I also use distilled water with Prestone coolant to cut down on mineral deposits. I use 5 gallons of water to 1 gallon of antifreeze. The Yong Heng, to me, is well worth the price.

Just ordered O rings from Amazon