Search results for query: *

After the first reply I took a reset as the SPOOL (thanks Scott) probably cant touch the inner side of the reg body so any friction must be between the oring and the SPOOL. I lubed the old oring and tried again. didnt feel that great to me but I I'm going with Motorheads recommendation. BTW...

First time with a leak in my Impact MKII PP 720 so decided to replace the piston while it was apart rather than polish the old delrin one. Got one from cape fear and was expecting the part to be plug and play but doesnt appear to be. I test fit it. once the face clears the oring it seems...

As you said, Joe brancato confirms that if air is coming out it should go in. Waiting for an answer on whether the slo flo restricts the tank fill process as it does the gun fill process. The valve has a gauge showing tank pressure and one on the output side that typically shows pressure...

I have a 6 year old carbon tank and Joe Brancato TJ3 valve that was just sucessfully hydro tested. i asked them to fill it and was told there was some issue with their compressor, so i ended with 2900 PSI. took it home and didnt touch it for weeks. Tank held air without issue. went to...

924.20

Just purchased an Impact from John. Great communication, quick shipment. Trusted seller +++++++

If you want a huma, scott, AKA Motorhead is knowledgeable and can install it if you need. He is doing a S510 for me now. good luck bob

350

789.14

here are pics of the connections. you may or may not need the scuba valve. hose goes with the filler valve.

I have one of these http://www.rlairgunsupply.com/high-pressure-air-clamps-hoses-and-parts/high-pressure-fill-station-regulated-adjustable/ think it would work. I got it with a tank and dont use it. PM me for pics and info. thanks bob