Search results for query: *

Hi, i received a second hand dreamline with the super light barrel system. no steel barrel housing, new brass part at the receiver with the 15mm lock nut but there is a big gap at the muzzle between the liner and the shroud. the liner is not held in place at the muzzle and is dangling...

i took the liner from my dreamline .177 and married it with my hw100 i made a brass adaptor with o-ring groove and two grub screws for clamping the fx liner in place the brass adaptor is glued (loctite) into the steel pipe the seamless cold-drawn precision steel pipe has inner threads...

Hi, it replaces the steel liner housing and the aluminium shroud but this first version is not a shroud: the factory steel barrel housing and aluminium shroud: i made a sleeve / insert with 1/2" UNF threads glued it into the carbon barrel to use the original "barrel retaining...

Hello, the FX Dreamline is now for a few months available in germany. i have waited for years and now im the proud owner of a dreamline classic .177 / 500mm barrel we have a power level limit of 7,5J / 5,5 ftp in meter per second with a 0,547g / 8,44g exakt pellet 165m/s or 540 fps my...

hey, im looking for a .25 springer with very good accuracy. its for an eldery gentleman who can not load smaller pellets anymore. max. range 30 yards bench rest only paper no hunting he is willing to spend 500-600$ + scope should i order a HW 98 ? the cocking effort is not a problem!

i generally dont like dovetail and all my rifles have picatinny. its easier for me to swap scopes because i dont have a scope for every rifle :D this is now an attempt with a low profile picatinny rail. the rail is from umarex and made for the walther rm8 / air magnum the 4 small stop pins are...

Look what i have found: JSB Knockouts awsome price if its real!

not much to do, bad weather, lets clean the LP50 barrel! i bought the pistol second hand about 14 months ago and shot thousands of pellets but never cleaned the barrel. no accuracy problems at all - its like a laser but i was curious about the barrel condition. after disassembling the barrel...

https://www.youtube.com/watch?time_continue=1&v=XljMMcgwWx4&feature=emb_logo

hey guys, what would you buy for 25m / 27yards bench rest, quiete and .177 for my home range - no hunting and only paper targets should be mag feed no single shot rifle i can buy a full power and turn the power down (because of the neighbours) have to figure out what is acceptable for...

actually im tuning a gun to be super backyard friendly for really short distances up to 15 yards for target shooting only. below 650 fps i can hear and feel hammer bounce and the grouping goes down the river 1,5 - 2 inch at 30 yards above 650 the muzzle noise is very fast and the grouping is...

got a vulcan gen4 .177 and im curios if the bore diameter of the shroud is smaller compared to the bigger calibers ? i tried to open it with a pin spanner tool that fits perfect but it did not moved a bit and i stopped. is it glued ?

Hello, do you guys know what is the best material to make a kind of sleeve for a hammer / striker ? i want to reduce the noise level. is it peek ? polycarbonat ? its for a low powered sub 12ftp rifle. the muzzle report is mouse fart quiet with a moderator but the noise level from the action...

i received a new pcp rifle today but the precision at ~27yards was terrible. would you say the crown could be the problem ? it looks handmade to me and there is no force needed to push a pellet through whole barrel and no choke. i will not tell you the brand because im waiting for a response...

Hello, its about a BSA R-10 SE in .177 5,5 fp because its used as target rifle for 10m (i know there are better ones but i cant change that) extreme low fps spread - stock regulator working good. issues: very loud muzzle blast. you need air protection without ldc shot count only around 150...

Hi, can someone explain me the benefits from a fixed magnification power scope ? its cheaper because less moving parts, defective rates are lower because of less moving parts .... ok, got that. are their any more benefits ? better view when its getting darker ? better field of view ? would like...

Hi ! its no secret that gamo uses many parts from bsa for their pcp rifles. i would like to know the differences between these two rifles! i found out the obvious things: stock air cylinder lenght barrel lenght overall lenght can you guys tell me something about the triggergroup ? is it the...