Search results for query: *

usually its 420mm barrel with much longer shroud

Hi, im not sure if the 9015 would fit. the rifles are very similar. https://www.benke-sport.de/anschuetz-9015-ersatzteil-set-luftgewehr-high-power-16-joule-regulator-36283 this is a legit german dealer. maybe he can answer your questions and ship to the US. [email protected]

thanks guys and a big thank you for your offer tdhouser1964 i will contact you if necessary the liner support was pushed right up against to the end of the shroud. you can see it on my photo - it sits so flush and perfect you cannot see it at first and specially if you dont know what to...

Hi, i received a second hand dreamline with the super light barrel system. no steel barrel housing, new brass part at the receiver with the 15mm lock nut but there is a big gap at the muzzle between the liner and the shroud. the liner is not held in place at the muzzle and is dangling...

Cant you see the breech seal or a empty groove ? removing the barrel should be very similar like on the vulcan https://www.youtube.com/watch?v=InguLiXv3jo BUT maybe it is not necessary.

https://de-de.facebook.com/pg/germansportguns/posts/?ref=page_internal Diana belongs to German Sport Guns

take a look here: https://www.airgunforum.co.uk/community/index.php?threads/air-arms-pro-sport-can-i-get-a-silencer-moderator-to-fit-the-20mm-barrel.139253/

did you tried to push them back starting from the muzzle ? if not... well, trying pushing 5 pellets through the choke.. :D ill bet every gunsmith can help you in a few minutes. have you put out the barrel at least ? you could try to melt the lead.

if you are about to order the spare pipes, just give it a last try with some loctite :) Like nr. 263 https://www.henkel-adhesives.com/us/en/product/threadlockers/loctite_263.html

i took the liner from my dreamline .177 and married it with my hw100 i made a brass adaptor with o-ring groove and two grub screws for clamping the fx liner in place the brass adaptor is glued (loctite) into the steel pipe the seamless cold-drawn precision steel pipe has inner threads...

often the main problem with shrouded barrels: many moderators are to heavy they sometimes pulling down the shroud and misaligned the shroud to the barrel a very good example is the dreamline shroud. its very weak in design: there is a o-ring holding it in place in front of the action. o-rings...

Silicone oil is everywhere available. the crank case oil could be a bit more specialized. there are unlimited discussions about crank case oil for compressors in general in every airgun forum. if i would own this rather expensive hill compressor i would stick to the hill crank case oil if no...

im wondering what this corrosion causes ? the big part is made of brass ? the u-shaped thin parts are kind of valves ?

any news about the .177 liner with 600mm/380mm ?

it should be m10x1

walther / umarex stopped the production. they are even in germany no more available. i hope they will start making a successor but what should they improve ? maybe the stock.. i would like to have an adjustable cheek piece. but i know for sure that i will never sell my lgu and lgv. :)

O-Rings arrived. they would fit perfect but i cant get them in. forget about how big they are for now i have to use my liner housing without o-rings until i find a solution to fit them in. when different length .177 will be availbe, i will be very happy to try them out without buying the...

Yeah, i ordered some O-Rings. quite unusual sizes but i hope they will fit. Liner 7mm OD, CF Housing 18mm ID i also made an aluminium version for the 1/2" steel (heavy) barrel / liner clamping nut its not yet finished because i have to make a tool for the lathe to cut the two o-ring groves...

Hi, it replaces the steel liner housing and the aluminium shroud but this first version is not a shroud: the factory steel barrel housing and aluminium shroud: i made a sleeve / insert with 1/2" UNF threads glued it into the carbon barrel to use the original "barrel retaining...

this version here: https://www.co2air.de/thema/108456-walther-reign/?pageNo=2 its has a regulator, its adjustable but it is the 7,5J German Version.