Search results for query: *

First off I have no idea what I am going to do with this beast. Gunbroker ridiculously low bid that held up. Appears to hold air. Came with: Case UTG Accushot 4-16x44 30 Benjamin eXTREME 145gr 200 JSB 81.02gr Added STO MUS II moderator. Put 3 of the 145gr down range 740fps 180FPE Put a...

First off I have no idea what I am going to do with this beast. Gunbroker ridiculously low bid that held up. Appears to hold air. Came with: Case UTG Accushot 4-16x44 30 Benjamin eXTREME 145gr 200 JSB 81.02gr Added STO MUS II moderator. Put 3 of the 145gr down range 740fps 180FPE Action...

Just received and tested the Dual Magazine from Heartland Airguns. HIGHLY RECOMMENDED https://heartlandairguns.com/ols/products/zelos-25-caliber-dual-magazine Absolutely perfect in my Max 1. Zero slop, exactly 15.5mm thick. Two .25 16 round magazines in a single package. Fired 16 rounds...

I went ahead and degassed my Max 1 to see what threads were used for the tube to gun. Much to my surprise it appears to be m11x1.5 or m11x1.25. What a bizarre thread. Definitely not M10 or M12 I was hoping the Zelos/M60 bottle adapter would work. But that is M16 Now the question is do I go...

The Max 1 only comes with 1 magazine. None seem available anywhere. Since the Max 1 shares components with the Snowpeak M60, I decided to take a shot and ordered a Zelos/M60 magazine from Big Air Precision. Unfortunately I ordered .22 and needed .25 (Dunbass). I went ahead and tried the .22, it...

https://a.aliexpress.com/_mq0gBg3

AirForce has a limited number of unchoked threaded slug barrel Condor. https://airforceairguns.com/product/condor-with-threaded-slug-barrel/

I have an itch and it needs scratching. I'd like to play with some STX barrels in my Boss .30 and Royale .25. But my reading tells me the STX have to be slightly modified to fit in the ST breech. 5/8" and 0.125 deeper where it slides in the breech. Has anyone done this modification?

Just was on the Pinty site and the bullpup and single shot are back in stock. 10% coupon too https://pintydevices.com/pages/pinty-pcp-air-rifles

Are the FX STX barrels useable in the FX Boss or would they need to be machined to fit?

Has anyone developed a magazine for the Max 1? Specifically the .25.

When that hose blew i was testing the latest addition to my compressor. An air cooled water cooler. Just a fan and radiator, no actual compressor cooling. Sealed 12L/3.2 gallon reservoir https://a.co/d/bXhXTA7 I topped off two 9L tanks one from 2500psi to 4500psi and on from 3000psi to...

Just over 4400psi the hose clamp at the compressor gave up and the hose blew off. I was standing far enough away that it didn't hit me. Fairly new off Amazon in April https://a.co/d/fzPABda

https://a.aliexpress.com/_mrDopMF Max quantity 1

I am trying to get a Boss to seal. The air pours out the transfer port any attempt to fill. Like there is nothing between the regulator and the barrel. Replaced the poppet and valve seat orings Replaced the poppet and valve seat. What else can it be?

Advertised power was 120j/88fpe with .22 slugs I'm getting 90j/66fpe with .25 46gr slugs or .25 33.8gr pellets with factory setup Anyone getting close to advertised power on their Max 1?

I've been playing with Plenums for about 8 months. This only applies only to regulated guns. Plenum supplies additional air volume to help keep the pellet/slug under acceleration. Hopefully for the length of the barrel. When air pressure drops to a level low enough the pellet stops...

I acquired a rifle with a bipod. Atlas Bipod The only difference I can see is the label on the front of the Bipod The ones one Atlas web site The problem is it appears they early models look just like the first picture. Since the rifle is an older model it is quite possible a real Atlas...

For Sale SOLD $335 plus shipping. Avenger Wood .25 UTG Accushot 4-16x44 scope Buck Rail Avenger Moderator Holds Air. Just do not use it enough due to acquisition of multiple AirForce rifles. Have rifles (Max 1 from Wes and a FX Boss from here in classifieds) arriving next week. So, I would like...

I was looking for a Bottle valve for my Reximex Throne 2 and was on BestFittings in the UK. I found these two Bottle valves. I don't see any difference. Reximex Valve...