Search results for query: *

I just picked up one of the bigger cyclone filters to use with my Gx CS2 pump. I have an Avenge X tube so the filter has tripled the pumping volume. Takes longer to fill but that’s not a real issue. The connection to the filter output is an M10-1 fitting that is attached to the whip to attach...

I had my Avenge X 25 out today for some testing at 50 yards. That turned out to be one of those some good; some bad stories. When I got back home, I filled the gun up and hooked up the chrony. I was using my Apolo cheap 25 grain pellets. I wanted to see just how the regulator was performing...

This would be considered the efficiency of the gun, I assume. My Avenge X 25 cal will get 50 good shots with a 25 grain pellet. Over those 50 shots the pressure will go from 300 to 150 bar for a 3 bar/shot air usage. Does sound about right? I’m sure that all guns are different with different...

I thought I had the leak taken care of in my Avenge X. I fixed something with the reg gauge because it slowed way, way down. Today I found the leak out of the Foster fitting. It looks like getting the main tube off the gun is not vey complicated. Has anybody done this and how tight are things...

I received a new regulator from AV and 50 shots strings of the JSB 25.4 grain, 25 cal pellets at 915 FPS are giving me a SD of a tick above 4 so that looks pretty good. I did notice this AM that I lost about 20B of tank pressure and I hadn’t noticed that before. I did do a number of degas/fill...

Avenge X in 25 cal. The rifle 3 months old and has about 500 pellets through it. I had noticed that the regulator seemed to be creeping a lot more than it should. Using the analog gauge, I had the setting at about 160 bar. Overnite the Reg would creep up to around 200 bar. Putting on a digital...

I looking to get whatever silicone is used to put a drop or two into the inlet of the gun to lube the o rings. I bought some Super Lube but failed to notice it is the grease, not oil so this isn't something I'd try to get into the cylinder via the fill nipple. Any recommendations on what to get...

I’m thinking about getting one but the hammer spring adjustment looks to to be a major PITA on the tactical version. If the entire buffer tube and butt stock assembly is removed, it appears that the access to the hammer spring is pretty easy. I’m assuming I could just undo the castle nut to get...

I put together a Crosman 2260 that I moved over to PC using the SafePak adapter. I have a 13ci bottle on it and the regulator is set for roughly 1500 psig. I had my son hand pump the tank to around 2500 today and I took it out to shoot it. It's a 20 cal using a Lothar Walther barrel that was a...