Search results for query: *

This on reddit: While shooting one day, she jammed on me. I removed the barrel and cleared the two pellets, unfortunately it dry fired without the magazine or barrel on by accident. I reassembled it and tried to fire and it just clicked, cleared the pellet again and it still clicked. So I...

When I fill up my Avenger from depressurized to 4K psi, the cylinder head on my CS2 gets hot. Not just warm, but uncomfortably hot. The pump doesn't sound like it's laboring, the fans are running, everything looks okay. Should I be concerned?

I shot the FX Archery Chonograph simultaneously with the cheap Chinese chronograph. It was pretty messed-up looking, I should have taken a picture. Shots according to the FX were from 917 fps to 863 (80 shots, fell off the reg). The Chinese chrony thought the shots were slower by a little...

This is a picture of the air group in my Rainson. I have questions: 1. What does that M5x4mm grub screw (see arrow) do? Manual was not helpful. There appeared to be nothing in there, and the grub screw bottomed out at the bottom of where it goes. 2. If it's leaking, how do I make it stop...

I'm trying to replace the o-ring in the mouth of my Rainson Edge's bottle - I'm pretty sure that it's leaking because that o-ring is all screwed up. Does anybody have any good tricks for inserting the o-ring in there?

My Rainson Edge has a leak, of about 15 bar/day, and it turns out that it is in the regulator. After removing it, this part of the regulator appears damaged. (Taken by the James Webb Space Telescope) That line from the light goes right through one nick, and there is another nick towards the...

I decided to go ahead and buy a Rainson Edge X from Ares Tactical. I purchased the 'Dr. Russ Hunting Special', in synthetic. I haven't had a chance to shoot it much beyond some chrono testing, so this is kind of between an unboxing and a real review. What came in the box: The gun, set up for...

I was shooting the Dreamline the other day, and after a shot the gun started to hiss loudly. The gun lost air fast enough that it was out of air in about a minute. After replacing a lot of o-rings from the foster fitting to the receiver with no noticeable effect, I thought that it might have...

https://hardairmagazine.com/ham-columns/tuning-regulated-pcp-airguns/ From what I can tell, this article is saying that if you turn the hammer spring in (in means increased spring compression) you get to a state where air is being spent after the pellet has already left the barrel. The...

Does anyone know the size of the fitting on the main air gauge on an Avenger .22? I'm interested in buying a Sekhmet digital gauge, and it comes in three sizes: M10*1.0, 1/8 BSPP, and 1/8 NPT. The Avenger schematic offers no help - just a part number. Thanks!