Search results for query: *

I had my .22 Dreamline Power Pup shooting like a “dream” at 39 ft/lbs with a 600mm barrel… certainly not a high power tune. It shot a 198 17X (!) 40-Masters… then boom! It sounded like a rimfire as velocity went from 890 to 1009fps on the shot where the valve broke. The rifle retained both...

I did this build yesterday... it turned out great ! Why did I pull apart a good shooting Cayden? It always seemed too loud for the power level that I was shooting it at - due to unshrouded barrel. It was very moderator picky and only liked one particular moderator that wasn't very effective a...

Hi Guys, This is the foster fitting from my RTI Prophet Performance P1 . I removed because rifle was leaking through this port. When I removed, there was no o-ring, but appeared to be a small piece of clear rubbery substance. I added the small o-ring in the picture. It worked for a couple...

I got in some 100 yard practice today using my two "100 yard" rifles - both would be considered "oldies": RTI Prophet Performance V1 - .25 LR barrel FX Wildcat MK2 - .30 700mm barrel I've been amazed at the results with the .25 Prophet and the AEA 29.5g. I chronoed 50+ shots with the Prophet -...

Want to buy a laminate or wood stock for FX Crown Mk2. Not interested in GRS. Thanks, -Ed

I think AGNers will really enjoy this video - it seems a lot of the concepts regarding a footballs flight also apply to the flight of an airgun projectile ! I wonder if our resident expert BallisticsBoy would agree…? Definitely worth watching.

Following up my previous thread regarding 75 yard results with the JTS .22 22.07g using the FX Dreamline PowerPup... After the positive results with the JTS 22.07g at 75 yards in the FX rifle, I pulled my RTI Prophet Performance V1 out of the truck to test the JTS 29.63g domes. The Prophet has...

This past Tuesday I was out shooting 100 yards with my .30 Wildcat Mk2. The wind kicked up and my lighting at 100 yards got tough - my 100 yard target is in the woods and its dark at certain times. So, I brought along my .22 FX PowerPup and .25 RTI Prophet (I'll cover .25 results in another...

Raining all day so dissembling one of my Crowns to tune trigger further. Is this type of damage typical on Crown hammer in locations where sear catches? I’m just shooting pellets at modest velocities. I’m not using what would be considered a lot of hammer spring preload. If typical...

Looking for some input from those experienced with adding regulators to previously unregulated rifles... Scenerio: Unregulated rifle with a nice 50-shot bell curve - with velocity peaking at 150bar at current hammer spring preload. Determining Optimal Regulator Set Point: Would you set the...

Starting this thread with my “real world” fill times with this compressor. You can see my other “GX-E-5K1 Arrives” thread for unboxing, setup and filter information. As you may recall from my previous thread: 177 minutes for 9L “Great White” tank from 0 to 4,600psi (320 bar) 8 minutes 35...

I just took delivery of a GX-E-5K1 today. I ordered from the GX store directly - $900 delivered using their 10% off coupon. Interestingly, even though I bought from GXPUMPS official web store, it was delivered by UPS and said "Amazon Delivery" on the shipping notifications from UPS. Below are...

I found the slow leak in my Wildcat Mk2 - it had a slice in the o-ring in the gauge end of the air tube. See red circle for location of sliced o-ring. When I disassembled, I noticed a second “groove” that has no o-ring installed. (See white circle for location at very front of threaded area)...

Hi Daystate Tuners, I'm looking to adjust the Length of Hammer Throw on a Daystate Wolverine R... Huntsmen Regal/Revere: This excellent Sub12 YouTube video shows how length of hammer throw is adjusted on a Huntsman. I believe that all Daystate slingshot hammers allow this same adjustment, but...

Excited about my new-to-me .30 FX WC Mk2...I purchased her recently as part of a package deal on AGN Classifieds. There has been no "shooting weather" in CT lately, temps below freezing and windy - typical January weather here. Her History: Some of these AGN rifles have some great history...

Are FX shroud muzzle end caps glued on? Tips on removing? I own way to many FX barrels, lol - and have a few that I may want to swap the end caps around. Other brands often have the muzzle end caps screw off, but FX shrouds seem to have them bonded on… -Ed

I’m looking for a laminate or walnut stock for my FX Wildcat Mk2. If you have one in good condition that you are not using, let me know. Thanks, -Ed

Parts from my GX CS2 Compressor - failed due to large gear in lower end. All these parts were working fine when compressor failed. Parts List: Power supply ($50 at GX Pumps website) On/Off Switch ($20 at GX Pumps when available) 2 Working Fans ($30 at GX Pumps) Replacement Bleed Valve for...

Do the Taipan Veteran 1 and Veteran 2 use the same fill probe? Thanks, -Ed

Looks like I’ve found the problem, lol… -Ed