Search results for query: *

That’s great to know on the 13/16 socket. I ordered a 20 mm six point from Amazon. still waiting, most likly tomorrow. Thanks for the info. The Great thing about these post, are someone else will benefit from what we dis covered. 🪰Fly

Wait it does. I thought the same, but the dia is turned down to the same size of the tube. But doing that the flats are shorter than a regular six point head of bolt. With the dia turned down smaller. When they mill the flats on the smaller dia the flats do not touch each other. I have been a...

Well the way this one is machined no way to use a socket. I wish I could. 🪰Fly

Up date that cap the air fitting is screwed into has a very thin 20 mm flat. I ordered a open end 20 mm wrench to try. I have never had good luck breaking loose any really tight bolt or fitting with an open end wrench. Even worse is how little area the wrench has to grab to. I may put a little...

Great, thank each and everyone of you. I tryed unscrewing that cap that that so called foster fitting is screwed into, And ole my god that thing is Tight!!! I did not want to damage it . looks like I need vice grips. I do not want to mare it up, but I may have too. I,m going to try raping some...

Well I ordered an avenger O ring kit from Captain O ring, $15 . Now I need to do some homework. On taking it down & putting it back together right. 🪰Fly

Thank Everyone of you. This maybe a stupid Question , but what is the foster fill fitting? Is that what’re fill the air chamber? I,m going to try that first if that is what I,m right in thinking it is. I need to find a YouTube video explaining how to rebuild one of these. I,m also going to...

i know this has been talked about many times. But with that said I have not seen a true fix, unless I missed something. These are just too good of pcps to not find the fix. Some on said it might be the brand of o-rings there using? Does ANYONE truly know the TRUE fix to this problem. I have one...

I been into air guns for several years now. I ,m a guy that has many interest in many different hobby’s. In doing that I put one aside and go to another for sometime, then come back. No different with this one. Bit funny I remember back then when all the talk was about Yong Heng compressors...

I have an avenger .25 cal pcp. I now have an air leak when it sits overnight. This gun is my favorite rifle of all. But I hear they are notorious for air leaks. My question is where to look first, & if there is any way to keep this from happening? 🪰Fly

My lord what a nightmare! By nice to know which O ring to check first That is the most common problem? 🪰Fly

No Tuxing use too but the two compressors I,m waiting for parts are Tuxing. This parts shortage must have something to do with the tariff thing that’s going on? 🪰Fly

Well right now I can not afford a Tuxing twin, I wish I could. Maybe down the line. I think the main problem we that have these smaller cheaper versions of pcp compressors is this. These small compressors are doing all they can do Work wise. The larger ones can handle this a lot better. The...

You know something we are all seeing today. Lack of parts? I have 3 compressors down. Waiting on parts. i,m a hot & cold shooter. In the winter I do not shoot much. Even in the summer not that much as others do. i use to, but today I have many other interest. but in saying that, I can not...

First does any here own a ToAuto A1X-Pro compressor or a Tuxing TXESO62 compressor? If so what are your thought on either one. I watched reveiws & they make them seem appealing. But I want to here people that first hand working experience With them? Now the reason I ask about both Tuxing &...

Thank you Gerry but on this one pump it has a capacitor I can rob off it. You guys are the best. As for as the motor windings it don,t think it’s that, no smoke or burn smell. It ran for just a few sec,s. 🪰Fly

Well you have sold me on Gx compressors. My problem is my wife. It,s you have three compressors already, ya,ya ya, ya! I think I may buy one with out telling her, & put up with the Riff, of doing so! 🪰 Fl

I have two compressors down. Waiting on simple gaskets & O rings for one. If you need parts today & have.China made compressor. you have a long wait. Seems like two months minimum. If anyone here knows a faster way to get parts, please speak up. 🪰 Fly

Thank you for your response. But I don,t think that’s it with mine. Every since I got this compressor it seemed to struggle starting. Once it got going no problem. I had it hooked up in a spare bed room. I always wondered why it had a hard time starting. I came to the collision maybe the...

I guess but for the life of me I can not understand how google can to continue to let this happen. You take some person wanting to get into our hobby would not know. These scammer are doing this with every product from lawn mowers to electric bikes. What ever, JMOHOP