Search results for query: *

Nah. Although a couple of yrs back by now, port the thing and throw a 100cc plenum at it and it´ll wake up. Truth be told though i´ll stick to my Meta Premium. A way later design by Rex, and it shows like.. everywhere.

Holy thread revival i guess but to answer your question, yes. The thread on the bottle is the nowadays common M18*1.5 Stock carbon fibre bottle is one on 700cc´s however so why want to replace it?

Mm. Tell you what, as many other ideas it came to evolve... and see this here is where it ended up. This thing heads into the chamber just upstreams of the actual poppet and seat and is now on approx 70cc+. It will happily suffice for anything i throw at it, but as you can gather this is a...

FWIW Mike. When into hardened steels and stainless the drill bits to use are cut on a 135deg angle vs regular HSS on 118. This difference in cutting angle is what delivers so to say, and such drill bits ain´t really all that much more expensive than the regular HSS stuff. What to remember when...

...it. Simple n rugged in short terms. On the earlier guns it´s rather common with broken loading levers as is it with poppet stems that looks like a d*mn Z after a No of firings. That being said though... I pulled the plug completely on one in 25cal and the thing just simply delivers. Granted...

Yeah. So to bring everybody up to speed. Yes that´s an external plenum and yes that´s the Reximex NYX in case. In other words the mods pulled can just as well be performed on a Benjamin Gunnar too. More to it than meets the eye though. The thing now sports a PEEK seal on a 2mm dia shank for...

Not exactly my first rodeo, been doing the 25s and up that way for quite a while. Works rather well, but in all honesty to a large degree depending on caliber.

Nope. Not even close.

...i work on guns.. might be able to hand a bit of insight. If there´s anything specific, just ask. Yes. Barrel is threaded to the main block via a M12*1 thread. This is also where you set end gap. Ie; turn the barrel in until the cylinder can´t be rotated by hand anymore and then just a smidge...

...Point is that it is a Turkish brand alright (which isn´t exactly a good thing from a history POV) but one where they´ve actually gotten their s*it together. It is a modern design, based on a receiver block. It is very very rugged and simple to the build while still of very good quality...

True. Most do though, with a bit of detective work invested. These days most of the both Chinese n Turkish crop guns offered run at least semi fast twists at the very least, which from a twist aspect will work with most commonly available slugs. However. As you bring up, and ain´t that the...

You measure the diameter of the pill shoved through the bore to get an exact measurement of what grooves n lands tell. Now. For a gun sporting a choke this means that you first up remove the small o-ring within the breech, that´s there to seal vs the probe. This just not to ruin it as you use a...

Many a Turkish made pcp can be rather picky on slugs as far as size. In 25cal sorry to say there´s rather few flavors to pick from, but start by pushing one of them 33,95´s through the bore with the barrel off the gun and then take a micrometer to it to get an idea of your bore measurements...

Many many moons ago now i picked up a 22cal Kral Puncher Auto. All was well, for a brief while. It was accurate enough, not an issue, but far from reliable. It would, to the letter, hammer the stock mag innards out of shape was anything changed from the stock setup. Margin of error simply put...

...there is that them holes are off vs what should be, handing that the entire trigger assy rocks back n forth where it sits. IMO that´s just plain *rap and should have been handled before these puffs were let into market. That diffusor in turn. As you crank down on it vs the barrel, and you of...

Btw Salim. While you´re in there it might be a good idea to replace the plastic material used for seal on the actual valve too. What Aselkon were thinking, no idea but.. it wears so fast it´s to laugh at. I have since turned what i need myself, and modified the poppet to run on a 2mm shank...

...the tube guns. Bottle gun regs are similar. To the novice it might take a little getting used to, but they actually work decent as you toss a fresh seal at them - in this case out of POM plastic. Btw. To get it out of the tube i use a breech piece for an FX gun as it´s threaded M13*1. Works...

Many, while far from all, of the Turkish made guns run semi tight rifling twist, which is what slug guns thrive on. If there´s one brand that truly is garbage out of the box it´s the early Turkish made Aselkons. However. That there is an Aselkon MX-10 that got a decent sized plenum tossed...

I´d say this is a matter of balance. To my findings very much can be had by altering that power adjuster. Get or make one that in essence will close the shutter completely, and just open ever so slightly at full. Point being that such a restriction is a constant and should to greater avail hand...

@ Graycrait. The ones i´ve been into for instance have a valve out of a material that´s got to be recycled Coke cans from far east Asia. Cough at it and it´ll strip threads and what not. Barrels are decent though, but the general build, IMO, is juuuust to keep the thing together. Fact is, i´ve...