Search results for query: *

I was just watching the new videos on the Slash posted by Taipan. The gun is much more involved taking it apart compared to the Veterans, but at least you don't have to disassemble the Slash to adjust the regulator. Also, I don't know anything about semi-auto guns but with a hammer gun, we are...

If it was my, I will definitely turn down the external regulator closer to the Huma Air. Probably around 50 bars higher, so 200 sounds good.

From my experiences with the .22 Long and Standard, take a tune that you're comfortable with your Standard and add about 5 FPE for that same reg pressure in the Long. My .22 Long was shooting about 31 FPE at 100 bars reg pressure while my Standard .22 was shooting 27 FPE with the same reg pressure.

From what I've found, the Taipan Veterans don't really like being run at regulator pressures below 100 bars. Yes, you can tune it down that low but my experience is that the accuracy suffers by quite a bit. When I had my Veteran .22 Standard, at 100 bars, it was shooting the JSB Hades 15.89gr at...

🤩 🤩 🤩

As far as I know, the Veteran 1 .25 from a few years ago had LW barrel with tight chokes. The more recent ones have unchoked CZ barrels. I'm not sure when they made the transition but guns from the last half of last year have the CZ barrels according to Taipan. The type of barrel you have might...

Thanks for the comments everyone. I will leave the gun as is for now. I have another Veteran, a Standard .25, that is tuned to 45 FPE. I'll start using it more as I gain confidence with the Short 32 FPE.

I'm quite certain that I hit one just under the ear probably level with the eye and the other one just behind the head. I'm attaching videos of both shots. Both times, when I turned off the video, I thought for sure that they were done for.

Yes, maybe but now I'm a bit gun shy to use the gun at that power tune on squirrels. Before this, I had the gun tuned to 25 FPE briefly and that was even worse.

I'm using JSB King 25.39gr at 755 FPS.

As I continue to explore lower power tune .25 caliber I constantly learn different aspects of it. I currently have my Taipan Veteran Short .25 tuned to 32 FPE. I've taken a number of squirrels with it; both headshots and a heart and lung shot. The last 2 though didn't go so well. The shots were...

As was already mentioned, there are several zones where individual guns will find their harmony. I'm my case, I tend to focus on FPE (maybe over focus? 🤔) because my guns serve as suburban varmint rifles. I'm trying to balance the safety and power for taking pests as humanely as possible.

My Long .22 was getting around 90 shots at that power with the 15.89gr. Hades... So the same as yours. That was at 95 bars regulator. I was only able to get 60 shots with the .22 Standard when I tuned it to 27 FPE at 88 bars. For all the tunes, the hammer spring tension was set to give around...

357.89 Edit: oh wait... this is not a giveaway 😅😅😅

Yes, I'm aware of this erratic behavior which is why I replaced the Belleville washers with the proper rating for the reg pressure I want to set. When I had the improper heavy washers, when I had the regulator that low, whenever I degassed the rifle from the bleed valve up front, I also had to...

That's a Ukraine made Taipan Veteran that had the stock changed to the newer laminate stock.

I have the Standard Veteran .25 that I have tuned shooting 45 FPE. I figure I'd tune the Short for a lower power option for shorter range shots. Yes, the Short with the 65 bars regulator tune was good enough for 15 meters, but I don't want to be limited in distance like that because the gun/tune...

I did some shooting tonight with the Taipan Veteran Short .25 at 33 meters. The tune at 95 bars reg pressure is definitely much better than before. JSB King 25.39gr. and breezy 8 mph wind. Please don't crucify me... I know these are not the best groups that you have ever seen but I couldn't even...

As I gain more experience with this gun, I am finding this to be very true. Seems the hammer weight and springs (valve and hammer) really limit how low a tune this gun can take. This probably explains why Taipan has never made a sub 12 ft/lb version of this gun (as far as I know) even though...

Yes, I get that, but I'm trying to understand how the variables relate to one another, because without understanding what variables really matter, I'm practically flying blind since most guns today are sold at maximum settings. Case in point, when I bought my Taipan Veteran Long .22 a few years...