Search results for query: hammer adjustment

Have you tried raising the pressure on the regulator? I doubt that those small cheap manometers are accurate, I would put more precise digital manometers. Does that Max1 model have the ability to adjust the hammer force?

As time goes forward I KNOW some of you Ghostly owners have lots of data to share hop on Share your data I would really like to produce a condensed / consolidated tuning cheat sheet for the ghost in a variety of calibers asap. Also Has anyone found some gauges for the Ghost, especially the...

The 30 grn shot extremely well at of mine. Im going offer you a suggestion about the the hammer spring. If your hammer spring is 54mm . I would suggest that you cut back a 1mm at time. I end with 51-50 on mine before I got normal adjustment ( in on the hammer spring for more power, out less...

As fx does. They'll sell all the parts they've initially made for anticipated demand in the Initial production run and the guns will be upgraded going forward but the early adopters get had coming and going and get sold the upgrade. I had this with my m3 impact and the power block. This is...

On a previous post I noted I upgraded my hammer to 8.5g humma air hammer. My reg was at 135 and and was achieving 950fps with zans 37gr. This worked fine for speed but accuracy was just ok.so I looked for a better tune. After some correspondence from zan they said I should be shooting them at...

I have another question then after find out what pellet it likes and the speed that pellet going what should I do next because the is also adjustable hammer spring what does a hammer spring do

I have a Reximex Daystar. (Same as KRAL as Same Manufacturer) Im trying to tune it to get the proper bell curve, but I am runing out of Hammer Spring Adjustment. Im almost all the way in on the screw and the FPS seems to be still going up. ITs a 250 BAR fill and at Hammer Spring almost at...

Yes and no, so the reg should be set to 150b from factory, a 1/4 turn is about 30b up or down. Adjusting the hammer spring won't do a lot to change the velocity but the hammer spring is set pretty high from factory.

Regulator pressure? Hammer spring adjustment? At least it's not leaking - sounds like an adjustment issue?

@ jmohme They are at least on the second generation, adding pneumatic hammer, shortened cocking lever to allow unobscured and taller front gauge and a different valve adjust. At least on mine anyway.

Have Have read that our Zelos are over-sprung and that adjustments with the stock hammer spring are not very effective. On the FB Umarex Zelos Owners Group, a guy name of Dave Goldfarb is reworking his .25 with lighter springs and a new valve. It is showing promise as to making the Zelos...

The screw holding the indicator for the hammer setting in place. There’s a screw in there that holds it and screws into the actual hammer adjuster. If it’s loose you’d probably have noticed but if it is your actually not adjusting anything when moving the micro. Man… sorry, didn’t realize...

I remember getting my Maverick. It came set to 90 BAR and would shoot 13.43 gr MRD pellets at 570 FPS at MAX hammer wheel setting. The rifle is still the same aside for a dual transfer port, and micrometer hammer spring adjuster, even Hammer spring and hammer weight is the same. But now o_O The...

I'm gonna make the assumption that the sensitivity is going to depend on where that valve is set. Hammer adjustment didn't too much for my .22 700mm in terms of tuning. Sure it increased and decreased the fps by over 100fps but that didn't make it a good tune. I had to actually adjust the valve...

As the DRS Classic was apparently aimed at being a "Lower priced" entry level PCP they made it a pretty much "use as is" rifle. Good for newbies and those that don't take things apart immediately (unlike moi ). To adjust the reg pressure you need to take off the stock. And if you want to know...

It has a hammer stroke adjuster. Adjusting this effects valve duration.

Do you know how to adjust the stock hammer spring on the r3

A quick look into YouTube...explains a lot !!! Took less than two minutes. All right there for the looking... Trigger adjust, hammer adjust, regulator adjust, etc., etc. ! Mike

Thats exactly hoy my hp 177 acted going under 20 fpe at 80 bar shooting 13 gr the only real adjustment i got was with tiny reg changes then i went to the lightest hammer spring in the kit and now i shoot at 100 bar pw 12 and have a lot of adjustment. Check with aoa but i think the hammer springs...

I installed a left hand aluminum breech and a discovery valve . Plus an adjustable hammer and the adjustable hammer spring.