Search results for query: hammer adjustment

Its realy nice indeed :D just a question, would it be and option to make a hole for the hammer adjuster and reg so you dont have to take it out to adjust? 😍

2250 2240 And this one. Adjusted the hammer spring and trigger pull.

Thank you.

Remove the hammer spring from Huma. That is too much. I tried it aswell, lightest Huma hammer and Huma spring and I was not able to adjust my hammer properly. Just use the lightest hammer from Huma, that is enough for 130 bar

Anyone take their 22 call and make it a 177. Is there more than a barrel change required Presume the hammer spring pressure and perhaps the air valve to be adjusted

If you notice the ES increases, remove the action from the stock, remove the Hammer Spring adjuster, the spring and the hammer. Then wipe out the action with a lint free cloth to remove any grease or debris buildup. Add a couple of drops of light oil to your fingers and rub them on the hammer...

I have seen a YouTube video of "Shooting With Phil" in which he installed a micro adjuster in FX Maverick for hammer spring adjustment. Pics below: The idea looked promising to incorporate in RAW HM1000X. I shall install this micrometer in RAW HM1000X inbuilt with anti hammer bounce device...

Since I got my new Zelos I've been obsessed with its tunability, particularly regulator pressure vs hammer spring tension. Thanks to the knowledge and experience of members here, I've learned a lot. After many test sessions with a chronometer and varied regulator pressure vs hammer spring...

For the end cap, I bought an AEA 1/2" adapter and it threaded in and works to add a moderator. Worked thru hammer spring adjustments and got 967 max on the 190bar setting with 30g slugs

I hadn't taken mine apart yet, so I didn't know that you couldn't adjust the hammer spring like the previous EVOLs. Mine is also shooting MRDs over 900fps and as you, I don't have a reason to change it as it is shooting very well. Unfortunately, there is no documentation at all provided with...

...find the fastest speeds with the hammer while leaving the valve stop full open. Then dial down the speed about 3% or so with the hammer adjustment, and finally dial in groups with small changes to the valve stop. On my Impacts the hammer wheel was always at max, and I use the fine tune to...

If you turned the little internal adjuster screw all the way in clockwise and it’s doing the same your gun must have the wrong hammer weight. Did you buy it new or used ? Sounds like the heavy .30 hammer in the .22 or maybe even a tungsten.

I got mine in. Adjusted the hammer spring and got max speed of 967 with 30g slugs at the stock reg setting. Also picked an AEA 1/2" adapter to thread into the end cap for a moderator.

My P35-22 has had no O-rings replaced or other maintenance work. It has had the hammer spring adjusted and the trigger adjusted and an occasional barrel clean. A LOT less than my 3 times as expensive Caiman. I've done more to the 25 and 177 but it was not because they broke.

I too made this mistake the first time and it made for an odd feeling and violent shot sequence.

On some guns it is fairly easy to change the valve return spring. A stiffer spring would close the valve quicker potentially making the gun quieter and use less air. On nearly all PCPs the hammer spring can be adjusted but it also needs to be balanced against the regulator setting. Lowering...

The butt stock is removable and then its easier to reach the hammer adjusting screw. But it is a little bit of a hassle.

The Taipan Speed Dialer is a great design for very easy adjustments to the Hammer Spring. If I compare this to adjusting the HS of other brands, the “ease of use” factor is a model to be admired for airgun use. I wish other brands would make it this simple.

Is backing out (counterclockwise rotation) the hammer spring on Uragan 2 lowering the hammer impact? I know it sounds silly, but iirc, Leshiy adjustments are the opposite, so wanted to confirm. I backed mine out as much as I could to see if I can bring velocities down to subsonic levels. I...

Thank you I have the tac .25 👍