Search results for query: hammer adjustment

1st...make sure you have air 2nd...this is your a power adjuster. On side is a knob other side is marked. Turn all the way towards the + sign 3rd...this is your hammer spring adjuster. Screw the adjuster in, more tension more more power. All this is applicable providing it is a non...

Most likely the hammer spring is screwed in too far causing hammer spring bind. It is a short and heavy spring so not a lot of adjustment needed to change velocity. Once that is backed out and checked, then sear engagement would be next. With all the adjustments on the Taipan trigger group it is...

I have a Sporter HW100, and I did a guesstimate to get it to shoot 8+ mags without a refill. I don't know how fast it is going, but it is very accurate at 10M indoors, and it makes my spinner flip outdoors at 20M. So I am pretty happy with that. I wrote down, -turned reg out 3/4 turn, and...

...“headroom” on the wheel to shoot 30 and 34g pellets. (I LOVE the 25.4g .25 pellet for accuracy). So now you have details on the hammer adjustment to 1/10,000 of an inch for your EXACT rifle… so get out your Allen keys, take the rifle apart and GET TO IT, lol. Hope this helps and Good luck...

pp700 bears mention. It's one of the guns where the barrel is threaded into the receiver. Externally adjustable regulator and hammer spring, dirt cheap replacement barrels that are easy to swap, decent shot count and power, traditional thumb-cocked hammer, compact, and mine has been 100%...

On my most recent repair I followed your advice and learned the hammer spring adjuster can be adjusted out past flush with the back of the block and still fit in my carbon stock. Prior to that I thought having the adjuster plug flush with the back of the block (stock setting) was as far 'out'...

If you up reg pressure and speed goes down that means the reg pressure has exceeded the ability of the hammer to open the valve. It will need more hammer strike. If the reg is above 200 bar I suspect you may have exceeded the top limit of the ability of the hammer and spring. Not positive...

I have. A buddy with an fx crown and he can adjust hammer and regulator curious what types of guns offer that seems really useful to be able to have options.

From that point. Remove your stock... You do this by unscrewing the 4 2mm hex screws in the pistol grips. You will see a flat round large flathead screw in the back of the receiver once the stock is off.. that's your hammer spring adjuster. Start shooting into the chrono. If you're already...

That sounds like a lot of hammer. I don’t think I’ve ever taken it that high on any of my tunes (which may be part of my problem?). At only 80 bar wouldn’t 3.5 on the hammer be overkill? I will adjust my regs to 80/120 and see where that gets me 👍 thanks

Today I used a Chronograph for the first time , but the pellets were between 845 to 850 fps they are to long for the Guantlet magazine , so I used my single shot tray. The Apolo 25.4 should have been going to 890 , but did not. Could be a hammer spring adjustment.?

I’m very interested! Key features borrowed from my Daystate Renegade: Slingshot hammer Electronic trigger (not entire electronic gun) But with added features: Externally adjustable regulator with 1 bar (!) clicks Externally adjustable hammer spring preload Caliber and barrel swaps...

Didn't try it with the hammer spring set flush but I would expect not much change. Really didn't change much with hammer spring adjustments with reg at 90bar. I'm gonna up the reg a little now.

Got it, that would have been too easy, right? The description sounds like valve lock, which means the hammer cannot strike the valve stem hard enough to properly knock open the valve. There are a number of potential causes, among them: regulator seal failure that is causing the valve to see...

Thank you

My hammer spring is at 0 clicks from 0. It's at 0, reg at 2150 psi

Thank you for interesting thoughts. Interrelation of hammer spring tension and regulator pressure is very interesting. I like to play with measremments of different depensencies, unfortunately I am a bit restrictes just having Hatasan Flash QE. I install the regulator though. Looking for buying...

After I saw your video, I pull out mine and start tinkering with it now I don’t know how many turns was in the hammer is it stops and then you can still go out like 11 clicks can you tell me how many clicks is your hammer in from absolute off. In mind, the power adjustment works different...

Thanks. A bit brain dead of me as I see my 4 trigger mounting screw holes don’t block the hammer lock down grub screw - so the trigger can remain installed. Its just that my trigger wasn’t mounted when the power adjustment question came up. Its been a bit since I’ve had the trigger on as I’m...

I put a .20 barrel on mine, it was originally a .177. Only needed very slight tweaking of the hammer spring, and yes I did fiddle with the transfer port restriction, but probably didn't need to. No probe and no oring inside the barrel greatly simplifies a caliber change, relative to more...