Search results for query: *

Them Swede's must have really short arms! I added a rubber butt pad to my classic to increase LOP!

Nice! I wish FX could have had the forethought to put access holes in the classic stock so the reg and HST adjustments could be accessed. But, it's not too bad, I just remove the stock screw and let it sit in the stock. To make an adjustment I just lift it out of the stock, lift the front for...

Adding the 2 dowels reduced the volume by 26.5cc, so it's a tad over half the size it was. I was looking for between 25cc and 35cc and ended up with 36.5cc. I did a 10 shot string to test it out and the first shot was 898fps, the remaining 9 was 900 fps! This is shooting the 21.9 grain AEA...

I don't have that many hours on mine and just use it to fill guns and a 90ci tank. But, this guy works for GX Pumps and his YT Channel has a lot of good info on rebuilding and repairs. https://www.youtube.com/@songjason3205/videos

I have been experiencing the same thing since installing the slug kit to my Crown. I guess it's time for an inspection. Thank you for this topic, I had not idea why it had started doing it all of a sudden, but after reading your post, I realized it only started after the kit install.

Exactly! Plus, the wooden dowels are different lengths, so technically different volume offset depending on which one you use or if you use both.

So, a $5 ⅝” dowel from A e Hardware, a little sanding and cutting to the proper length and I have two plugs for the plenum. I need to do some math to figure out he actual volume offset by each dowel and I should be able to figure the plenum volume with each or both dowels installed.

I have a similar idea. The SHP Plenum has 3 plugs similar to the one on the front of the standard plenum. When I move them there are essentially 3 holes connected by either open space of a passage way. The diameter of these holes is just shy of ⅝". I'm thinking of cutting a couple lengths of...

At $85, I’ll sell it to someone else before taking a chance on permanently ruining it. Plus, filling it with epoxy kinda killed the usefulness of the angled gauge attachment.

Do you know what he used as a filler? I was thinking of filling it half way with BBs, but was concerned one might end up in the valve!!

Just wondering if FX or anyone else is working on any other sized plenums for the DRS? I have a .22 with the 600mm barrel. I came with the 11cc plenum which is very efficient but is not great for heavier ammo or higher power. I purchased the SHP 63cc plenum and it makes a huge power increase...

Sadly, it seems you can't trust anyone anymore, not even the company entrusted to transfer the funds! I was burned through PayPal on a purchase once, but fortunately, I used a CC as the source of funds and was able to dispute the change through my bank. As a seller, you don't have that as an...

I've had one for a few years now and love it. It's my dedicated shooting rest for shooting both targets and rats from inside the house out to 50 yards. It really helps a lot!

My guess at what's happening... The gauge on the pump advances quickly as the fill whip fills with air, then the pressure in the pump has to overcome the air holding the fill valve closed. This is probably when you see it slow down. Once it overcomes that pressure and the valve opens you are...

Great shooting Louis! The video was great also! The clarity of that Zulus is amazing!

Great video, the clarity is outstanding! If your editing software allows your to slow down the frame rate, try dropping it between 5 - 10 fps, it should make it appear less jerky and easier to watch. I can't wait till these digital scope manufacturers start incorporating some sort of video...

Yea, but I still have reg creep! It had crept up to 140BAR after sitting for over 24 hours. Looks like the next mod is going to be a Huma Regulator.

I just installed the tungsten hammer... Wow, what a difference! The regulator had crept up to 140BAR (I didn't shoot it yesterday). I counted the turns as I removed the HST adjuster, it was in 8 full turns. I slipped in the tungsten hammer and screwed it back in 6 full turns. First shot with...

I got the one for the Crown, Maverick, Dreamline, etc., i.e. the one designated as all other than the Impact! The way they were designated, I didn't think the one for the Impact would fit.

No, I prefer to have a floating hammer.