Search results for query: *

I would add DAR to the list of guns to avoid. I bought a Gen 3 in 0.22 caliber and also a Gen 3 in 0.25 caliber late last fall and both have developed issues with less that 100 shots through them.

I do have a Notos and it has been good. I liked the DARs because they are a little smaller and lighter than a lot of rifles. I'll check out the Avengers.

I've posted about my issues with 2 of my DAR rifles. Well, I just got a new Beeman Underlever Bullpup in 0.25 cal and right out of the box the trigger doesn't work. It takes anywhere from 2 to 10 tries pulling the trigger to finally getting it to fire. I tried adjusting the trigger but still...

So you put the Huma reg in yourself? How much was it? was it an easy swap?

Last week I returned a Gen 3 0.22 cal DAR that I bought last September because it suddenly lost 250 fps in velocity. That gun had less than 100 pellets through it. Yesterday, I got out my Gen 3 0.25 cal DAR that I also bought last September. The first 15 or so shots were fine. I then topped...

Never mind, I found them on the Utah Air Gun site.

Any idea on the size and number of threads per inch?

I finally got a chance to tune my 0.30 cal FX Maverick Sniper. The regs are set at about 170 and 140. I turned the IHS out until it would not cock with the power wheel set at 7 and then turned it back in 3/4 of a turn. I'm shooting 50.15 gr JSB pellets. I'm now getting the following...

Well, I checked the hammer weight and spring and they both look correct for a 0.30 cal. The hammer weight is 13g and the spring is 52 mm. I'm going to reset the regs at 170 and 140 (or as close as I can with that tiny gauge) and try it over the chrony again while adjusting the IHS.

Thanks for the response!!! I'm busy right now but will give it a go later this evening. Thanks to all again, people on this forum are the best!

How exactly would I do this?? This is a new gun so I don't want to void the warranty. I've never really did much work on pcps so this is all new territory for me. In fact, does IHS mean "internal hammer spring"?

I did read the owners manual several times. It states that the 2nd reg should be 25 to 50 bar lower than the first reg. I also watched several videos including the Ernest Rowe video. I believe Rowe set his at 150 and 170 for "high power". I did notice that my gun has a different reg gauge...

I got a chance to shoot my new 0.30 cal FX Maverick Sniper this evening. I have the first regulator set at 180 bar and the second reg at 150 bar. I'm shooting 50.15 grain JSBs with the hammer spring wheel all the way up to number 7 and only getting a velocity of 750 fps. Does this sound right...

The 45 grain 0.30 cal AEAs shoot better in my Gauntlet SL30 than any of the other pellets and slugs I've tried including JSBs,JTSs and various weight slugs. I can get a 1/8" c-c 5 shot group at 25 yards with them.

I have a Gauntlet SL30. I have not shot it much yet just at 20 yards. At 20 yards my best 5 shot groups are 7/16 inch. That is with 50.15 JSB, 45.06 JTS and 64 Gr Javelin slugs.

I just picked up a FX Maverick Sniper in 0.30 at the Midwest show last weekend for the exact reasons you described. It's my first FX. It has 2 regulators which have to be set up separately so there is some adjusting required. There are videos on line which goes through the procedure. I have...

It's about a 4 hour drive for me each way but I'm going to get up early and go for it. I know I would kick myself if I didn't go. I went to the Findley show last year and picked up a couple of RAWs. This year I want to check out an FX and/or a Brocock if I can find a deal I can't resist.

I've been getting frustrated lately with some issues I've been having with some of my pcps so I decided to get out my 1961 vintage Sheridan Blue Streak. Holy crap!! I was shooting 13.73 JSBs and getting 5 shot groups at 20 yards that were 1 slightly ragged hole! At 10 yards 5 shots were 1...

I have a gen 3 0.22 DAR that I bought last September. I checked it's velocity with 15.89 JSBs and it was 830 fps. This evening I shot it and it seemed noticeably slower so I got out the chrony and sure enough, it's only shooting the same JSBs at 580 fps. What would make a relatively new pcp...

Does anyone have this gun and how do you like it? I've tried searching for info but can't find much. There a few videos but are in spanish. It's a regulated bullpup in 0.22 and is just under $200 at some places.