Search results for query: *

Is it true the compressor gauge is more accurate??? Compressor stop needle is a bit before 3000psi I assume it’s psi so I filled my pp700sa the machine stoped but the Pistol gauge shows 18 X10 bar??? Almost 200bar omg im so dumb 3000psi equals 206 bar so i need to put more air in the pistol...

Hello everybody before I buy I want to make sure…I want to add rear 300cc bottle to my hunter compact which has the front 480cc already. Friend Is sending me some spare part such as: saber tactical front bottle adapter st0056 The silver one the picture. He told me that this should also work to...

I know there is a master class to convert Panthera to Hunter moving back bottle to front. But how do you add an extra bottle to back. There is a large black round piece on the stock. I am guessing this is removed and same adapter ST0057 you plug at back with 300cc bottle and valve. Is this...

New to pcps with magazines and this FX HPC bewilders me as I have never used one in my life. bought used and found 2 magazines in the case. one metal and other polymer. Both same size but one is thinner. It seems the clear part top part of one magazine is thicker than the others. I assume it’s...

I don’t see any answer about this… does anybody know of magazines that are low enough so I can use low rings. currently I have a vector continental 34mm 3-18x56 thats sits perfectly on my panthera hunter compact on low rings but the original mag will not fit so I’m using single shot. I wished...

Was gifted a 22 panther Hunter compact. pls help with some questions: if I buy just a 300cc bottle and valve is there anything else I need to connect and add another bottle on the stock? I actually want to get the next size larger then put the front bottle at back. I have never had an FX so I’m...

Planning on buying fx impact m3 compact. I know fx is for long range. I want to use this indoor range which is 10 yards. I am so worried about the bore to scope height that I will definitely need tilt the scope. Is there a acope that has a ton of elevation to be able to do close close shots. Or...

So with no time to go to range I decided to build a dedicated indoor air gun of 10-12 yards, pls don't laugh... SO just thinking if I have a scope with very little elevation adjustments and mount on rifle is a zero moa rail the shot goes low, as I picture in my mind the scope aim is parallel to...

Chinese scopes have improved so much that I have a Vector continental and all the Discovery ED scopes except the LPVO, which I hate cuz the parallax is 100yards. All of them are on my PRS 6.5 CM, 6 GT and 7 SAUM gas guns. So working on my cz 22's, I wanted a new scope for the son's cz 457 scout...

Hello again folks been doing some tuning with my .177 pp700sa. I ordered huma reg and just rec'd. I want to be able to shoot slugs and I think I'm almost there but almost but maybe not. Ok so I put the reg in and I put it at 145lbs. The hammer spring screw used to be flush and now I screwed in...

Hello folks just wondering why my pp700sa 16 inch barrel cannot fit this pellet. I know that for example some slugs have slightly larger diameter but this is a generic pellet. Also unlike some pellets it tells you its .178 this is .177. It does fit but very tight and Im worried it wont go...

So after having a scare trying to tune this pp700sa regulator I have had it. (tank was full but gun would not shoot. Valve empty) I am going to buy a huma reg so that I can see exactly where the pressure is. I saw the 2 year old video of a guy using JB weld to bypass the reg mod. What do you...

Pls help. I have extra parts. So I was tuning my stock reg on my pp700sa I screwed my reg screw all the way in towards the gauge. An I was getting 350 fps but very consistent and many shots. So I thought if I go opposite way towards the trigger that it would increase velocity. Omg I’m screwed...

I was changing up the orings in my pistol. I accidentally lost the positions of the washers. Does someone know the stock configuration of the bellville washers in the reg valve? it’s a stock reg. Also sometimes it’s hard to tell if Washer is this “(“ or this “)” as it sometimes looks flat...

So been having issues with my pp700sa with new 16 inch barrel. It does not sit flush against breech because that piece that goes between just spins around. SEE PIC So it got me thinking. Basically with this bit of a gap I have given it a throat. In powder guns the bullet should not be driven...

I’m sure this has been asked in the past. I have a smk pp700sa with 16 inch barre. I have the reg at 155 and the HST screw turned 5 revolutions. I can only get 10 good shots then dies off. I notice that everybody is getting around 20 shots. Should I decrease the HST first to get more shots? I...

Thanks everybody for always answering my questions. When I took my pp700sa apart cleaned put new o rings. During install I noticed that the barrel once threaded into action can spin if you keep turning. When you put the shroud and then the top barrel piece with holes and threaded it hold the...

Try to google this: PP700SA Barrel shroud extension - Shapeways Has anyone tried to purchase this made by MADDAD LFM TECH? Especially the metal version. Is this legit? I purchased a 16 inch barrel for my pp700sa and I would like to use it with the stock barrel shroud or a barrel shroud like...

I bought a pp800r in 25 cal that is awesome. R for regulated gen2. As you see three pellets on top of each other at about 10 yards indoor. I’m getting consistent 550 fps with the 20gr pellets about 13ft/lbs. I want more power to hunt with but too scared to mess with what’s good. I have not...

I have noticed that many airgun barrels are so thin. Is it because there are less pressure than powder guns. I disassembled my pp700sa and my god under that shroud is a pencil thin barrel. I can’t even see the crown. Also with the muzzle end being threaded there is not much room from threads to...