...base to rest on. The kit will include: 1) Pair of custom 3d printed tank feet 2) 3d printed carrying handle 3) 5/8" diameter air hose holder *I have found 5/8" hose holder to be fairly universal to hold around a female foster fitting(aprox. 5/8” diameter). Modifications may be necessary...
After a few requests with members I sat down and took the time to design and print a tank boot so I can set my tank vertically! Without the large cutouts it would of taken over 24 hours of print time and used 50% more plastic.
...include: 1) Pair of custom 3d printed tank feet 2) 5/16" shock cord 3) 3d printed carrying handle 4) 3/8"" and 5/8" diameter air hose holder *I have found 3/8" and 5/8" holders to be fairly universal to hold around a female foster fitting(aprox. 5/8” diameter) and/or around a 3/8" air...
...include: 1) Pair of custom 3d printed tank feet 2) 5/16" shock cord 3) 3d printed carrying handle 4) 3/8"" and 5/8" diameter air hose holder *I have found 3/8" and 5/8" holders to be fairly universal to hold around a female foster fitting(aprox. 5/8” diameter) and/or around a 3/8" air...
Curious if the AC motor rpm can be reduced on the Yong Heng to make it quieter, run cooler, and most importantly increase the life of the compressor? I would be happy to sacrifice the fill time of my tank/airgun to get more life out of the compressor. Thoughts? Would a controller like this be...
UPDATE: Found an air tank and no longer need one. Looking to buy an air tank setup that is ready to go with female foster. SBCA bottle would be fine if its in good shape cosmetically and would prefer the size to be 60 Cf or less. Thanks, CJ
...include: 1) Pair of custom 3d printed tank feet 2) 5/16" shock cord 3) 3d printed carrying handle 4) 3/8"" and 5/8" diameter air hose holder *I have found 3/8" and 5/8" holders to be fairly universal to hold around a female foster fitting(aprox. 5/8” diameter) and/or around a 3/8" air...
...include: 1) Pair of custom 3d printed tank feet 2) 5/16" shock cord 3) 3d printed carrying handle 4) 3/8"" and 5/8" diameter air hose holder *I have found 3/8" and 5/8" holders to be fairly universal to hold around a female foster fitting(aprox. 5/8” diameter) and/or around a 3/8" air...
...include: 1) Pair of custom 3d printed tank feet 2) 5/16" shock cord 3) 3d printed carrying handle 4) 3/8"" and 5/8" diameter air hose holder *I have found 3/8" and 5/8" holders to be fairly universal to hold around a female foster fitting(aprox. 5/8” diameter) and/or around a 3/8" air...
...include: 1) Pair of custom 3d printed tank feet 2) 5/16" shock cord 3) 3d printed carrying handle 4) 3/8"" and 5/8" diameter air hose holder *I have found 3/8" and 5/8" holders to be fairly universal to hold around a female foster fitting(aprox. 5/8” diameter) and/or around a 3/8" air...
Selling EDMU that came off my Edgun R5M. Replaced the EDMU with a Wika gauge because that is what I preferred. Gauge is in excellent condition and I will take $60 shipped to your door(CONUS) Paypal F&F or +3%. CJ
...include: 1) Pair of custom 3d printed tank feet 2) 5/16" shock cord 3) 3d printed carrying handle 4) 3/8"" and 5/8" diameter air hose holder *I have found 3/8" and 5/8" holders to be fairly universal to hold around a female foster fitting(aprox. 5/8” diameter) and/or around a 3/8" air...
Selling EDMU that came off my Edgun R5M. Replaced the EDMU with a Wika gauge because that is what I preferred. Gauge is in excellent condition and I will take $75 shipped to your door(CONUS) Paypal F&F or +3%. CJ
...include: 1) Pair of custom 3d printed tank feet 2) 5/16" shock cord 3) 3d printed carrying handle 4) 3/8"" and 5/8" diameter air hose holder *I have found 3/8" and 5/8" holders to be fairly universal to hold around a female foster fitting(aprox. 5/8” diameter) and/or around a 3/8" air...
...cord and I would recommend using the foam tape to keep the tank rolling within the stands and or the stands sliding along the length of the tank. *Another option (what I do) is use hot glue so I can remove the stands easily using denatured alcohol. Hot glue also does not leave a hard to...
I wanted a single shot tray for my R5M so I modeled and 3d printed some. If anyone’s interested just shoot me a PM and I will send the .stl file for free so you can print them or have a friend print some for you.
Has anyone noticed some kind of lube out of new tins of JSB Kings .25? They look and even feel oily after loading mags and I have never noticed it before. I bought a batch 1.5+years ago and I finally went through stash and I am noticing the new change in pellets I purchased a month ago. I’m not...
...cord and I would recommend using the foam tape to keep the tank rolling within the stands and or the stands sliding along the length of the tank. *Another option (what I do) is use hot glue so I can remove the stands easily using denatured alcohol. Hot glue also does not leave a hard to...