Search results for query: *

There's a screw inside with a oring on it that probably needs replaced. Some have had luck with putting a couple drops of silicone oil in fill probe and after airing up it stopped the leak

Did you try to find where its leaking?

I have a Jts Max and a Dar 3 and I like the Dar better cause its smaller and lighter and is probably more accurate than the Max. My Dar is very accurate shooting Norma 17.6 gr

Since its a Airacuda Max on a bull pup stock and the Max had clipping problems I'm not surprised these have the same problem

I had one in the shopping cart ready to buy but then watched Travis say its a Airacuda Max just made into a bull pup so since I have a Max I'll pass on this one

I love mine

I got JTS to send me one.

I can refill one for 50¢ and the last I remember they were 2 for 6.88 at Wal-Mart. They might be higher now. I use 30 or more every year so I'm saving a bundle

But I refill those propane cylinders over and over

Way to expensive to shoot. I think they screwd up making this one.

I'd use a minimum of two cylinders every time I took it out. That's 25 bucks. Way too expensive in my opinion.

No it will only fit if you use something to remove part of the bottom of the moderator so the air tube can clear it. I used a angle grinder with a flap disc to remove it. I marked the bottom of the mod while it was installed then with the barrel off and air tube with plenum installed I marked...

The seller on eBay lied to me several times and then it hit me. He's saying anything just to get them sold.

I did for about 30 miniutes then back to co2

I have a Urban and a Notos and I would choose the Urban

In

If it won't degas with the screw you back out the gauge just enough to hear air coming out

Mine likes FX 15.89 best but shoots other sizes and brands good too

From the end where the pellet comes out

If you don't want to save the front part of the moderator I used a angle grinder with a flap disc. I ground it down behind the 5-1/2" mark then used a hacksaw to cut a groove all the way around. I put it in a vise and the twisted the muzzle end and it came right off. That left the little piece...