Search results for query: *

Escondido??? I guess Del Mar doesn't want the Venue anymore.... oh well, I live in Texas now.

get one of these https://a.co/d/4ClqA76 or https://a.co/d/eGatNTe

I buy used leakers and Refurbished all the time, got great deals on leaker, don't expect Refurbs to be complete, I bought my Avenger .25 from Pyramyd air and it was missing the Baffle, some screws for the stock and only one Mag, no big deal, I made a Baffle on the 3D printer and had the m5...

A bad O-ring can happen to the best of Air guns, I wouldn't condemn a gun just for a 10¢ O-ring failure and the Notos is a great little gun, I've had $1500 gun leak from a Failed #006 O-ring in the fill port, that's why I keep lots of O-rings in my Parts box, Oh and remember to Lube those...

only the O-ring with Silicone oil or Silicone grease only, "DO NOT" use regular oil or grease on any parts exposed to pressure, NON- pressurized parts ok Tighten the Grub Screw very snug but not to tight that it damages the driver slot, 20-25 in-lbs. if it leaks try replacing all the O-rings...

they make a lot of money from Brass, air guns = NO BRASS.....:eek:

map of BLM land in CA, All BLM land is in Yellow https://blm-egis.maps.arcgis.com/apps/webappviewer/index.html?id=6f0da4c7931440a8a80bfe20eddd7550%20&extent=-125,%2031.0,%20-114,%2043.0

I just did Maintenance on Both of my PCP compressors, First the Spritech and then the GX, very easy to do, I took the cover off, removed the copper tube compression fittings, removed the top valve cover, pulled the valve spring and seal out, removed the top head and cleaned all gunk off, removed...

Well that's a bummer, I got mine from PA way back , it surprised me that they had them in .20, it goes with my Sheridan....(y)

it's under the Beeman label, it's also shrouded, one of my favorite guns, still have it ready for Varmints at night, got an ATN on it...:cool:

Glad you figured it out, a good cleaning will do wonders, make sure to lube O-rings with Silicone oil or Silicone grease, have fun...;)

been shooting Air Guns since I was little, but I got tired of the cheap plastic stuff they were putting out and bought a Sheridan, that was my main go to gun for decades, but when I seen a Night vision Ratting video on Youtube about 15 years ago, the guy was shooting a Weihrauch HW100, picking...

to me it sounds like the regulator is not opening or the regulator stop Valve is not allowing air into the main Poppet chamber, does the bottle get tight when you air it up? if it gets tight and won't turn, that means Air is entering the Poppet chamber, if it is loose and easy to turn, that...

it was a humid day when I filled the bottle, so it Fogged up the Gauges, it cleared up after I turned on the A/C....

made this one for my brother, used a different drop block with internal regulator, still had to modify the length to clock it, but it has clearance for the Bottle

sorry so late, O-ring is a 006 Size CS (IN) OD (IN) 006 0.070 0.254

mines shooting 780 fps which is right where I like it, stock with Bottle modification, if I want more Power I'll grab the Avenger or the Uragan.

I use a couple drops of 100% Silicone oil to lube the Fill port O-ring, a couple drops every 5-10 fills to keep the O-ring from drying out, does not harm the gun in any way. just don't over do it, like anything to much is not good. And it has nothing to do with Accuracy.

They usually do a great job, but one of the last refurbs I bought from them was an AV Avenger .25 I bought it as a gift for a friend, It had a blown pop off high pressure safety and only one magazine, not a big deal, fixed the high pressure safety and he bought more magazines, the gun works...

Just a couple of O-rings, pull the barrel and check inside and outside, replace as needed.