Search results for query: *

Have you tried cocking the gun before filling with air, could be the hammer resting on the poppet shaft.

Well My friend is back in Hawaii, he took his Hatsan Flash .22 and his Ruger 10-22 powder burner, Looks like the Hatsan is not powerful enough, it just gave the hogs a bad head ache..... literally.... he switched to the 10-22 and killed 9 hogs so far, he said a .25 or bigger would be needed for...

are you sure your lathe won't do metric, almost all can do metric, you just need the right gears, check out the little machine shop, https://littlemachineshop.com/products/search.php?tabName=Products&term=metric+threading+gears

if you are going to use a linkage for the trigger, hit up your local Hobby shop, they should have model airplane control rods and clevises/Heim joints that would work great.

about the same as mine, your barrel must be slightly different so it doesn't like the Benji's, you would think with hammer forged barrels, they would be more similar to each other but then again...... you never know what you're gonna get.

Thanks Randall, the Zelos is working out to be my favorite, it is the most accurate gun I have now, it out performed the HW100's, glad I got it....:cool:

get a good moisture trap filter and try to fill in Air Conditioned space with low humidity....

the avenger has a Ball bearing/spring type Valve in the cylinder fill end cap, it is not in the Fosters fitting, at least on mine, you have to remove the end cap of the cylinder and then you can access the Valve by removing the plastic hex head plug with the 2 small holes, be careful there is a...

Popped this Squirrel this morning, first kill for the Zelos .25 cal, used Benjamin .25 cal 27.8 grain pellet, perfect shot to the brain from 25 yards away.

Raccoon to a small pig, 15-50 pounds..... the SG is a Hefagita brand.... Chinese, I bought it off Amazon, it is a very nice guitar, I replaced the pick ups and the tuners and now it sounds and plays great, I have 3 Epiphone SG's also, I like them, bunch of other guitars too...;)

Oh Wow, sorry they didn't work well, mine are shooting 921 fps, maybe yours are going supersonic since they are only 27.8 grain and you are probably tuned for the 30.86's, just a thought, but then again every gun is not exactly the same and may like different ammo.

that's when you gotta listen real hard...... :eek::unsure:o_O even harder if you're deaf.... like me....

I use an Ultra sonic Leak detector, it finds 99% of the leaks, some times soapy water, clean good with air, towel, blow dryer and alcohol.

ordered 3 tins of benji .25's from Amazon.

Ordered pellets

I heard it was going to be a scorcher there, Hot here too, but not that bad, in the high 80's with high humidity in north east Texas, thunderstorms and rain, low chance of Tornadoes.... I did shoot today during the light rain, it was dead still, no wind, I shot at Vines, no critters in the...

manual https://mediacenter.umarexusa.com/s/o/Manuals/KsN5wZhWpGrKIrm8/wEHT1xhuWylWFwJ8

check the Fill port, if you have to , put a balloon on it, use a rubber band wrapped around it, make sure the Bleed valve screw is sealing properly, back it off then retighten very snug, last check the gauge, make sure it's snug tightly do not over tighten anything very snug is good for most...

Mine has been great, no leaks, shoots like a laser, I find when a gun leaks it is usually 6 things, #1- Fill port o-ring seal, sometimes they get hard and crusty usually #5 or #6 o-ring size, replace as needed or use Silicone oil to relube. #2- Fosters Fill port threads not sealing- bad...

Can you believe I'm leaving my Zelos .25 stock, I like it how it is stock, maybe down the road I might do the bottle conversion, but the barrel is perfect on mine, accuracy is phenomenal with Benji pellets, yeah Benji's, who would have guessed..... o_O:ROFLMAO: