Search results for query: *

The Impact was sitting in a locker over six months winter time without recirculating the pressure. Polishing the mating surface between two piston parts - especially around orifice - will do. With 3M polishing cloth, I bought and used last time back in 2021. Every oring I remove from its...

I am swapping .22 and .25 barrels, pellets only

The brown truck arrived today afternoon, and I refuse to pay $143 CAD to UPS at delivery !!!! - Taxes: 48.90 (which I was willing to pay) - Brokerage fee: 94.13 which I refuse to pay, but cannot skip it how the Invoice is cleverly constructed. This what UPS crooked business is doing once the...

Choked barrel? you can try to resize in minus = couple microns smaller than the groove, don't worry no blow by...

Back to optics, I have couple of high middle class that I can dual purpose between my f-class 308 and my airguns. Me personally like the x50 power scope variations and never kept any scope long enough that had less then x32 power. I am not hunting but shooting rings only, with that in mind with...

My 2021 L2 came with a 7.23mm red puck, and still the original after some well over 10K shots. I lubed the oring ones in a while.

Last time I cleaned and polished the Reg in my .25 MK2 was about two years ago, that is well over 20 K shots. I just noticed last week the creep started again, about 2 K shots this season so far with this Impact. Checked my records the Reg was set to 145 bars last summer and now climbs up I...

Last time I was playing with tungsten hammer my impression was the Reg shall be 160 and higher maybe about 180 ??? Ended up removing it and back to stock weights with a 140 bar. Last week I noticed that my Reg started creeping, last time was more then two years ago I service it. Kind a lazy to...

I show you my own view for things based on many thousands of pellets shot searching for magic that suits my brain. No two setups and tunes the same, you can start wherever you wish.

In past years I collected some custom barrels (3 actually), all these were shooting well. But once (many months later) I pushed a new scope camera inside just out of curiosity I discovered the scratch marks from a crowning tool. That made me so nervous I could not stand that longer, toke the...

Most of the issues you already pinpointed. Machining the die two half's shall be identical, fine polishing the cavities and no misalignment when the tool is closed. The Temp during the swagging process and the press force to squeeze out any internal bubbles...and the die will wear out sooner or...

Create a particles cloud around the barrel crown, like dense smoke or mist and shoot through that medium. I am interested to see the details what is happening with the pellet skirt and around it ...

What I am finding fascinating, that many people think money can buy them everything. Dady had enough chunk of cash and got a Bentley (or Ferrari or Corvette or Ducati whatever) and expects it to work flawless for he's ideas. And btw ended up ditching it right after a first corner. Just sayin...

In my gun club I am randomly shooting @ four different ranges (50 to 100 meter distances) and I have an issue with constantly changing and levelling between the bench heights in relation to target. Some steel welded with wood plates and some wood made, the levelling all different. Definitely not...

For a PCP compressor you shall use stainless steel tubing also the beads and fittings. I don't think a copper tube can survive the pressure.

This is my way how I eliminated or minimized couple of issues some people still noticing or experiencing today. What I did was a progress through past 2-3 years and not a single afternoon brainstorming, may help some people next time doing a surgery on Impact variants. Lets start with...

Later tonight I will open a new thread about "how to" eliminate the FX POI. Right now don't feel like it still sunny and about 22C, but for tonight I will make some pictures. A concept is clear as a mud, be ready for some elbow grease :)

Those rough outer edges below the skirt have a same effect as a bad crown on the muzzle end.

Sig Sauer Romeo7 and Juliet 6 combo, a second week I gave it back to a dealer and waited next seven months for my money. It was mounted on my Impact MK2. The below tried on my Leshiy2 Romeo 5 variant, returned to a store. One more returned can't remember the Brand but it wasn't cheep. Since then...

I wrap the "jamb nut" with Teflon tape just the length that will be hidden inside the barrel when tightened. Never comes loose.