Search results for query: *

I guess I’m in a little different boat with my build. I have a custom barrel built with a permanly bonded FX liner. Shoot 20.2 gr nsa at 930 fps. If I read the wind righf, 120-130y plinking is a ton of fun

I’m guessing they just drilled it from the top. They got three grub screws, not reason one can’t be drilled through to the two chambers. But it certainly would be interesting if they did anything inside that cavity. 5axis mill would allow angled hole.

Cheaper, less parts.

I suspect they are drilling the connecting hole through one of the barrel mounting grub screw holes. Very little reason not too. But that would require orings on the barrel, not sure

I’ll take a poke at this…. I suspect you didn’t have enough hammer to fully open the valve at the higher reg settings. As the reg pressure was dropped, the hammer was able to overcome the valve and fully open the valve

I’d love to own a theoben rapid…maybe one day

AZ will do whatever is requested. If he believes it’s doable. The shroud he does for raw gun is one piece alum. With integrated suppressor. “There is no seam or removable end cap at the muzzle” As the raw doesn’t have a ton of clearance between the barrel and bottle, he does a cuttout for...

Obviously no longer machined. What’s the upgrade?

IN Good to have quality sponsors, welcome!

What type of shooting? Range and power. You rarely, if ever, see impacts in FT competitions. I would say in some disciplines they are squarely beat.

In

You have to assemble it as you install it

Yeah…I current own my first taipan. Really impressed with shot cycle. It’s one of the only bullpups that I’ve used that it’s annoying in the my ear.

I’ve own a talonSS Coming from repeaters, it tough to be satisfied with it. But I will say, the gun felt like it would shoot forever without issue.

Mk1 is smoother twist solid barrel. All the rest use liner. I believe the mk1 and 2 use the one piece mag. So more stuff going on when cocking. As the action has to rotate the mag. However better for LH shooters. Mk3 went to the conventional mags. I believe the mk1 didn’t hav a rev gauge...

I dunno…raw has like 17-18 parts plus the trigger assembly. So not that huge of a difference

I just machined a part to convert the tester between the two thread sizes….so now I can test both sizes

IN

Can the micro hunter even do 800fps with 16gr pellets.

I’d say u also need a reg between ur tank and gun. Unless ur not planning on keeping the bottle open all the time