Search results for query: *

Sadly most of their stuff isn’t German anymore.

There have been several variants over the years. Brass, stainless and nylon bodies. The oem poppet is most likely nylon. But I would suggest peek if you want to make your own.

Good of you guys to take the time to type it out….thanks

Because compressing air doesn’t remove moisture. The air is heated, allowing it to carry more moisture. Once cooled it condenses into liquid form. The volume of moisture is retained, but compressed into a much smaller space. There is no way around that…

If you haven’t had issues this far…ur probably more lucky than anything else

Running a high pressure compressor anywhere on this earth…will result in very very wet air. You need to dry it

Even 1% relative humidity at atmospheric pressure will result us 100% humidity at 3000 psi. If you wants dry air, you need a water trap and a dryer on your compressor

model is missing the cross hole to connect the two chambers. I have to drill tap my block. And machine the square hole in the chassis. Otherwise, it’s been working well, no leaks so far

The harder 90buna cut much easier in the grub screws. But I could be wrong. Possibly if they were tighter it could improve the situation. I tried 12x1 buna90 and they just cut to pieces

Order 11x1 and 10x1. I believe he told me 11x1 but I use 10x1 Make sure to get them on the softer side. Buna70 These oring are a bit of a pill to slide into the action because the grub screw holes mess with them as they slide past. I find it much easier to loosen the moderator set screw and...

The price was also reduced It used to be $18.99 per package

They reduced the quantity per package as well as the price per package. They do run decent sales for unlimited quantities a couple times a year. Earlier this year they had 20% off for a month.

I have the identical gun but standard length….its the best bull pup I’ve owned

Two guns I feel confident carrying in my truck, in hot or cold weather….fully expecting them to hold zero. Raw hmx 1000 .22 custom short barrel. taipan mutant .22 huma reg.

Was going to say….raw gauge have a bit of an oring groove or land on the back. I really wish somebody would come of with a higher quality gauge that maintains the size of the oem gauge. I have zero interest in electronics on my guns

Emmm, guess I thought removing the check valve in the bottle would tell you if it’s the check valve that hanging up?

Well, you could trying filling it without the bottle check valve installed? Or u could remove the quick fill check valve too?? So if the guns holds air. Could bleed it all out though the bleed on the larger fill tank? Obviously all u would need it 500-1000 psi so you have an idea where and if...

Is it not taking air? Or not retaining the air once it’s pressurized?

Bought a spare some time ago. No oring in the actual valve assembly

They use a progressively wound spring. I’ve never attempted to install it incorrectly. But it’s highly likely it compresses differently if installed incorrectly. Not sure if that would result in variables though. Does you assembly include the intertia weight and spring? Inside the hammer?