Search results for query: *

An Alkin is top notch, but way over $3K

I have a K2 in really like it. I bought it because my GS4 performance was phenomenal and wanted a bigger compressor to do tanks. The K2 works exceptionally well, unbelievably quiet, fill's tanks in a hurry and it's heavy as heck. The k1 is a single cylinder as opposed to the twin cylinder in a...

Just wondering how much under size a pellet would have to be to lose almost 500 ft per second.

I have to omega 74 cubic foot bottles. They both take a metric 211 o-ring. Look small when I put it in there but they work like a charm. Hope it helps

I have a first generation. Took two of them to get a good one. The second one they sent me is the one I have and it shoots phenomenally well. Lots of shots, light, easy to shoulder. I bought a Huma reg for it but never installed it because the one that's in there has been solid as a rock. What a...

Airgun Warriors is one and American Airguns is another. Mike

Wont hurt a thing

It all depends what day it is. 🤣

Agreed 100%

I got this as a Christmas present. My wife said it cost like 22 bucks. Inside is a 1.6 liter Hatsan bottle. Fits tight AF. Comes with a nice strap a carabiner and has a pouch on front not very big and with the bottle in there there's no room for anything in the pouch. It's actually for a water...

In

This is the HDD. 8 x 32 x 4" screw, 2 flat washers, a thick o-ring or piece of rubber tube, locknut and spring(s). Assemble and preload the spring. Install and leave some slop where theq hammer slides back and forth about an eighth of an inch. The screw will slide right through your...

I agree 100%

The set-up I am playing with right now I got 58 shots from 3300 to 1400/1500 all on the reg. 7.9gn cphp's at 930. And makes the gun so much quieter 👍 CP The HDD is real easy to make. Can be done with no modification to the gun itself. And it uses the stock hammer spring adjuster. The spring...

Well I tried the spring at the stock length, ended up cutting it shorter, then cut it shorter yet and put it in an HDD. It was kind of disappointing though I had no hammer bounce any which way I tried it. But was loud AF and a terrible shot count. I'll try softer springs next.

That's cool that they had them. I plan to try cutting the spring shorter and also try it in a HDD. I feel this gun can be made much more efficient.

True value. Message me if you can't locate one.

Have not done.a shot string with the new spring. With the HDD I got 35 shots from 3200 to where it fell off the reg at 1400 or 1500. Max spring diameter is .430 the action checks .435 I can't believe I found this spring, it's a drop in mod.

Stop at the hardware store on my way home from physical therapy. Picked up a new hammer spring to try out. Pulled my HDD out of the gun and replaced it with a hardware store spring. Worked out pretty good, especially for a dollar and 69 cents. Specs on the spring are OD .43 x wire thickness...

Nobody I really have not been paying attention to shot count. It was nothing to write home about though. I was concentrating on quieting this thing down. That is pretty much taken care of now. The reg seems to work well. 10.5's at a constant 840/850 over a large PSI range. Haven't looked to...