Search results for query: *

  1. Squirrelmageddon

    RTI New RTI Mora is nice.... BUT

    My new RTI Mora 600mm in .25 just got here. Dam that's a nice gun.... BUT.... holy smokes, I can't stop looking at that case! The main foam is very firm which is really like. When RTI said it's a HD case, they weren't kidding. Along with the side handle, it even has a top handle and big...
  2. Squirrelmageddon

    FX Panthera\King Max Bottle Pressure?

    I feel dumb for asking, however, dealing with 4500 PSI scares the crap out of me when dealing with new equipment. I know my Impacts have a "250 bar max" label on the side of the trigger block. I didn't worry too much about it because it's being regulated down to 150 bar right behind the...
  3. Squirrelmageddon

    N/A FX/RTI Custom TPU Cocking Handles

    I two finger, sometimes 1 finger cock all of my PCPs. I really don't like the shallow knurling on all of them with exception for my Uragan 2's African Air Ordinance upgrade. That AAO handle has deep texturing a feels great. A 3D printer filament called TPU came to mind. I use it all the...
  4. Squirrelmageddon

    N/A Never seen a moderator clip this bad.

    So I whip out my new King today and low and behold I have POI shift. Not a few clicks to correct kind of POI shift, like 2 feet to the right and 2 feet down at 25 yards kind shift. I spent an entire clip trying to get on paper. Then I pulled my mod and took a look. WOW! FUBAR! Well guess...
  5. Squirrelmageddon

    FX Gave my King GRS Stock Some Love.

    ...and NO that shiny finish is not what you think it is! :ROFLMAO: Anyways, the King GRS stock is nice to look at but I was worried that the stock finish might staining from hand sweat. The color was kind of a raw wood matte and I expected it would stain easy. So here's the stock after 1...
  6. Squirrelmageddon

    FX Chronograph V2 Quick Disconnect Picatinny Mount Project

    I always wished FX would come out with a picatinny quick disconnect mount so I could swap my chronograph between gun with no tools. I've been looking for a QD mount and was going to have a machinist mill off the picatinny rail and put some 4mm holes in it so I could #D print a mount. Then, I...
  7. Squirrelmageddon

    Will a Inductive Hour Meter Work?

    I have a GX CS4 coming and wanted to put an hour meter on it for grease maintenance. The hour meter I ordered is an inductive type where the single lead wire is wrapped around a gas engine's spark plug wire. I was thinking it would pickup a signal off of the motor's positive wire, however...
  8. Squirrelmageddon

    RTI Prophet 3 Bag Rider Adapter Prototypes

    I cut a small batch of Prophet 3 bag rider adapter plates from 5mm carbon fiber so that P3 owners can still use the P1/P2 bag rider tube.. They are 1mm chamfered on both sides for safety & comfort. I'm going to call Tony @ Talon Tunes tomorrow to see if he wants the extras I cut. If anybody...
  9. Squirrelmageddon

    Airgun Technologies Uragan 2 Valve Sealed with an FX Impact

    I needed to make some reg adjustments on this new Uragan I picked up and despite my fear of the gun not filling again from 0 bar, I pulled the reg, opened it up about 2 hours (1/6 turn), put it back together and what do ya know, it wouldn't fill. :mad: My son was so ready to go shoot the next...
  10. Squirrelmageddon

    N/A Water Damage From Improper Filling

    I picked up a FX Impact MKII from a local guy who was finished with PCP's. He claimed his MKII reg pressure would fluctuate like crazy and the gun would never hold air. I took a look at the outside of the fill nipple and it was all corroded. I asked him what water separator he used and he...
  11. Squirrelmageddon

    .25 Slug Vs Tiny Bird's Head

    ***Picture removed for the brittle spirits***
  12. Squirrelmageddon

    RTI New Prophet 3 Special Delivery

    Talon Tunes really delivered. Tony @ TT really set me up with this new P-3. I own two Impact M3's, however, I have zero confidence they were holding a zero when a fat juicy dove lands on my fence. I've had too many misses because of that. After bumming a buddy's Prophet 2 for a few thousand...
  13. Squirrelmageddon

    .30 cal devastation

    Well this one isn't going in my freezer. JSB .30 44gr did this.
  14. Squirrelmageddon

    FX I give up on this STX barrel and slugs

    I have a .25 700 STX Superior with a 1:24 twist that shoots JSB 33g pellets exceptionally. It can't shoot a NSA .249 26.8gr slug with any accuracy. 25 yard group sizes are over an inch. I've shot them from 900FPS all the way to 1023 FPS in 10 FPS increments and they won't group well at any...
  15. Squirrelmageddon

    FX Impact Air Markman Colored Backbones and Matching Laminate Grips

    I just got my AM backbones and Form Rifle Stocks grips in and figured I'd share some pics in case anybody wondered what the the red and bronze look like with matching laminate grips. My .25 700mm bench rifle. The .30 500mm with camo grip. This is my pest control gun so I wanted the...
  16. Squirrelmageddon

    FX STX Barrel Liner Oring Lockdown

    After lapping 5 liners yesterday and reassembling the barrel assemblies, I got tired of the orings moving around. So I printed TPU holders to lock them down. I attached a ZIP file with STL files for .22, .25, and .30 liners.
  17. Squirrelmageddon

    FX Impact M3 - Do I need a heavy liner?

    I have a M3 with 500mm .22 STX Superior liner that I'm going to start shooting 23g slugs with. I had a few questions. 1) With the short 500mm length would I not need to bother with the STX Heavy liner? 2) I see guys mentioning "slug liner", What exactly makes a liner a slug liner? 3)...
  18. Squirrelmageddon

    FX Backyard Total Beast Build

    So I finally got dream build finished for close range pest control. It's my original M3 Compact in a .30 cal 500mm config and a Element HYPR-7 prism scope. I tried out a few LPVO's with tactical turrets and turned my interest toward a 4x-5x prism sight. The only problem was they all had BDC...
  19. Squirrelmageddon

    FX Impact Stripped Top Rail Threads

    I have two M3's and both of them have stripped one M3 thread in different locations along the top rail. The very first time I took apart my M3 and removed the top rail I immediately noticed how shallow those M3 top rail screws are. I make it a point to use my torque driver and only use 10 in...
  20. Squirrelmageddon

    Web App for Printing Oring Size Charts

    Would a website for printing your gun's orings in a chart along with an actual 1:1 drawing of the oring inner and outer diameter circles be of any benefit to you guys? It would look something like this: FX Impact M3 Orings Part # Description Inner Diameter Thickness 1:1 Drawing BR549...