Search results for query: *

  1. DreamSmoker

    Crown & Impact Power Mod Kits by FX USA (Ernest Rowe)

    Bottom line today is Power Kit Version 3 is it for the Crown.. .. It is a two piece without the Hammer Spring.. Earlier Version came with a New Hammer Spring.. That Valve change is only needed if damage occurs to the original Valve.. Earnest is finalizing a Tune option that requires the FX...
  2. DreamSmoker

    Got my Crown Power kit- very disappointed

    Correct... I was very surprized just how hard those 34gr. MK2s could be pushed with outstanding accuracy.. Don't be afraid to experiment with this Rifle.. It can take it..lol
  3. DreamSmoker

    Got my Crown Power kit- very disappointed

    Type Impact, Crown Regulator Mod in the search bar.
  4. DreamSmoker

    Got my Crown Power kit- very disappointed

    I had to chime in here.. I have had the mods done.. Its damned simple.. Once intstalled..Power knob was set at max by putting knob in place by hand and adjusting setscrew until you have a couple of thousands clearence on the high side of the cam of the Power knob.. Done.. With the Regulator...
  5. DreamSmoker

    Crown second thoughts

    Here is the very first version Crown Hammer Mod... https://www.airgunnation.com/topic/earnests-crown-hammer-mod/ #3 is now available at FX USA: FX Crown Power Kit Custom Item Number 19902, 19215
  6. DreamSmoker

    Crown second thoughts

    I have owned and shot many Air Rifles in my time... My Crown is the most versatile Air Rifle with supreme constant accuracy.. Have anyone of you Crown Owners done the simple Mods now available??? Mine pushes those MK2 34gr. Pellets at the muzzle 950fps.. Dime size groups all Day at 95...
  7. DreamSmoker

    .25 Crown maximum velocity

    My crown can push those 34s as decribed. You just order the power kit and install. Takes five minutes.. $52 Bucks You should also modify your regulator so you can take advantage of the higher pressures above 150bar..
  8. DreamSmoker

    EARNEST'S CROWN HAMMER MOD

    I am getting a few pms since I posted my recent data on this mod now available in version 3 at Fx usa.. Today I am now pushing those mk2s 940>950fps.. my reg still fine.. Remember? I ignore the reg gauge and pay attention to fps.. The Regulator is now a real power ajuster and now allows the...
  9. DreamSmoker

    30 cal Crown question

    Here is the Kit from FX USA description, Crown Power Kit Custom Item Numbers, 19902, 19215 cost was $52 not including the shipping.. Consist of the two pieces as show in the Video. Very easy to install.. Any Question can also be answered by FX with a Phone Call..
  10. DreamSmoker

    30 cal Crown question

    I am blown away myself.. Earnest made the Kit so quick for me and I received it a week early. Many Thanks to him and those Folks at FX America.. Think of this?? Earnest says you can get a Crown to shoot 30cal heavy Pellets at 950fps/150bar.. Another here is shooting their Impact 30 with the...
  11. DreamSmoker

    30 cal Crown question

    I just received my kit yesterday. Custom FX Power Kit.. Took only a few minutes to install. First thing to do is the Regulator Mod here: https://www.airgunnation.com/topic/fx-crownimpact-regulator-mod-tutorial/ My Crown is a 25cal. Shooting JSB MK2 33.9gr Pellets at 950/940fps. The...
  12. DreamSmoker

    EARNEST'S CROWN HAMMER MOD

    Well I recieved version 3 from Earnest today.. FX Crown Power Kit Custom Item Number 19902, 19215 This mod will a solutely make a difference in shortening locktime. To take advantage of max power settings. You will need to modify Your regulator as described in another post here.. I am...
  13. DreamSmoker

    NEW BARREL INSTALL FX CROWN

    If you are like me??? You want to get that Power.. Hammer spring adjusting can be like climbing a steep hill.. Bit by bit as you turn that screw in and shoot.. Seeing just enough change to see a difference.. I take the stock off.. Put the Power adjust Knob back in place without ball bearings...
  14. DreamSmoker

    FX Crown: The Dreaded "Regulator Creep"

    I would not even worry about some creep over a peroid of time.. The higher you go, the more creep.. It is physics in the design of a Regulator that has a external ajusting screw that seals the under air pressure as it rises..
  15. DreamSmoker

    FX Crown regulator updates

    I can make this simple.. I believe the creep comes from the face between the ajusting screw and the extended end of the piston.. There is where moving air through the very tiny holes in both the ajuster screw and the offset hole at the end if the piston rod takes place until they mate. BV...
  16. DreamSmoker

    FX Crown regulator updates

    Let me clear.. The deviation is only noticable at first shot by a hair at point of impact.. I can still hit a small squirrel in his head with that fist shot at 95 yards.. Did this last week..Rifle sat all night ... Keep the pressure in mind I am shooting at.. 154bar.. Also how many Rifles...
  17. DreamSmoker

    FX Crown regulator updates

    I thouht I would add more here as I have had a few problems with my Crown Regulator recently.. First issues was a leak that developed at the ajustng screw. Orings on the shaft were not lubed and were damged simply from turning the screw.. Called FX.. Found I have a early version Regulator. Has...