Search results for query: *

I will try it Jace. Send me a PM! Edit - I meant “buy it”

Yes, Alfa did it but now those barrels are rarer than hens teeth. I guess the 177 slice of the slug rabbit hole is not big enough to pay for the r+d/tooling. Jace did you ever get one of those 450mm LC fast twist Alfas?

Most of mine are solid enough from the factory to tune out the effect of creep, except for the FXs which seem to either creep or refresh slowly. But, as I mentioned, the L2 cannot be tuned to accommodate creep. I trust that your fix is good, but the 3rd reg should come from the factory working...

Having put a lot of effort into 177 slugging, I would argue that it’s not necessary to invest in a top tier Uber-powerful rig. That’s simply because no one produces a barrel with a fast enough twist to shoot slugs >16 grain. Most folks end up shooting 10-13 grain at <30fpe. For example, a...

I look at it a little differently because I’m not going to serve as an apologist for the manufacturer based on my own sunk cost. Many people seem to do this with FX and Edgun, denying the existence of obvious issues, promoting DIY fixes or aftermarket parts and pointing out that owners who...

Not a patch on the GK1. The downside of the removable mag is that it exposes the air passages making the Western guns much louder than the Hubens. The mags are also very fiddly. However, given that it’s so ugly, I might just pick one up.😁

Altaros 32grain at 890fps.

I see two questions here: 1. Can my “cold” AG hit a target at the distance I need to shoot at? 2. Does it have cold/slow shot syndrome? Question 1 was answered successfully by the OP at his 50y range. However, answering question 2 is a bit trickier and is affected by your zero and projectile...

Sounds like the reg is taking time to refresh such that a quick follow up shot is at a lower pressure. It should break in but your tune needs to be a bit more resistant to that effect. A digital gauge would give you a sense of the refresh time. Clicking up on the micro should reduce the...

Thanks for the clarification- I have a friend who is expecting one.

You stated earlier that the “...the M4 .35 800mm barrel at least in my experience does NOT like slugs. ”. So I’m asking what that experience is based on.

Have to say, after owning for a couple months, shooting over 2000 slugs, the Mora .22 600mm continues to amaze. The quiet, ease and lack of drama slinging 40 grain Altaros at 75fpe. More sedate than my M3 shooting little Hades pellets. No slow first shots, no reg creep and a benchmark AG for...

Thanks for that info. I’ve always been skeptical because the plenum space must be only ~10cc including the volume in the action. I shoot my .22 at 19fpe, so perhaps I should try it.

A bit confusing. In your experience, it does not like slugs, yet this one does? You bought several barrels and found one that shoots slugs well at 50y? If so, that’s not much of an endorsement…

I get these: https://www.airgas.com/product/Gases/Nitrogen/p/NI%206K It sits in my garage and I fill a smaller CF tank that then fills my AGs. Around $200 every time they exchange the cylinder, which is twice per year. Considering that I was buying a new compressor every couple years, it’s...

Looks great now!

Or, you can get the 6k PSI dry nitrogen delivered and not worry about any of this bs.

Prism. But c’mon Mike, this is much better than the endless stream of “hyped up on YT videos, got an M4, don’t know my ass from my elbow, please help” threads..

I would chop it at the angle of the butt end. It flows with the grip angle…

Someone should make a valve stiction sticky…