Search results for query: *

yes my mistake getting old

https://airgunforums.co.uk/threads/hw77-mk1-cocking-lever-ball-bearing.52200/

Knibbs states the seal is 25.75mm

https://spares.bagnallandkirkwood.co.uk/product/replacement-belt-for-the-umarex-walter-ppq-m2-pellet-magazine-belt-only/

the problem with the restaking the ball is where are you going to find the tool you have a spring and a ball in a small opening and you have to hold down, see what you are doing and get a tool in that space and strike with a hammer now if the assembly needs to come of why not update it to the...

when i got to Blue fork back in the day they were hardly making any part and the 1911 frame was not on their page at the time i wanted a raw frame and they made one or had one they hadn't set out to anodize at the time i was working on a Cothran piece that had been start by someone else and...

i think the oiling of carts has been misunderstood it is really for the internals of the gun and the best way to do that is by using the CO2 as a carrier so, when, The 850 Forum was around the biggest problem was the 88gr cart seal so a little oil on that would be fine and in the adapter sure...

these pistols were being sold as Snowpeak SP500 which they are, before they showed up as Diana P-Five and what a stupid name naming a new pistol the same as an old pistol but just spelling the FIVE now the pistol itself looks and feels good in the hand, my sights are good and you can see the...

so, i said it was not Blue Fork if the adapter is aluminum it is a Phantom and they used to come in many color and today just black https://phantomonline.com/product/45-frame-only/

well as always you work with what you have, in my case there are 2 screw holes to hold the sight frame on to the pistol and the weaver mount had the center cut away so the sights still worked

try some Button hex screw the head height is far less, so the grip might not come to play i had a similar mount for my Aeron B96 but the mount kept the sights in play

so, years ago i decided to make some single cart they had the pieces on Ebay for less than 10 bucks and this was a time that the adapters were in the 100 buck range i got some 1 inch ID 1.25 OD aluminum tubing and it was a little too big ID wise i drink Safeway water and the plastic bottle...

oh i understand, you get an idea and see where it takes you and that is a rabbit hole there has been many a time that i have an idea but not the tools, as in lathe and mill

so, yet assume you have nothing to work on the rifle your supplies will cost X amount and then you get it all cleaned up and now what, well cold blue and that will cost most and some good gun protector like Break Free now you want the project but at what point would a nice barrel off Ebay be a...

IT IS AN INTERESTING BUILD but not very practical for the average owner, because of the cost and tools needed hell, your R&D work in just CO2 was 250.00 but good job

PEP3 can you point me to that mount Brand or where purchased

when i first read about one i was like WHY now i just skim read this Hard Air Mag story and it has some information that is interesting they will run on CO2 and so they could use a 2 x 12gr adapter the power is going to be that of a Hammerli 850 and cheaper to shoot with the adapter...

Jetpopt does the rear sight have a bearing ball under the adjustment screw the trigger screw would need a 2mm now the trigger can never be sloppy and the why is because it has a compression spring pulling it down cocked or not the trigger will reset with a real snap now in the picture you will...

i am not sure you are going to find the older style black one, oh sure there might be some around

the simple answer is both will work the story was that the black tubed adapter lost less CO2 when you unscrewed it but who knows and it was the first one available and at the time they were about 100 bucks now the price is way down i bought some from Umarex for less then 30 bucks you can see in...