Search results for query: hammer adjustment

I originally changed the hammer spring tension by putting a small slug between the hammer and spring. To change tension I would have to disassemble the gun, remove the hammer-spring assembly and try different thickness slugs. I decided to make an adjustable setup, and this is what I came up...

The hammer wheel was not going to the max setting, I tried to remove the wheel by unscrewing the screw inside the wheel but looks like I stripped it. Now the adjuster ( red arrow) is loose and not engaged with the wheel. Any ideas how to fix?

I have 3 PCPs that just have all the O-rings replaced and I need to set the regulator pressure and hammer spring. May I know what the correct process is ?

I accidentally dropped the hammer out of my Crown Mk2. After searching the floor under my bench I found the rear hammer adjuster, the spring and the hammer. I also found the stainless thin weight ring the goes over the spring guide. There was no hammer weight like my Wildcat. Is this normal or...

Hi guys wondering if anyone can help me I was adjusting the hammer on the back of my rifle as I turned the Allen key to adjust a load of air started coming out so tried to turn it back but all the air released out.. is this a o ring that has broken?? And a simple fix or is it more ? Appreciate...

Hello, I can't adjust the hammer spring. Up to position 3 of the dial the power increases well, when I reach position 4/5/6/7 the power drops considerably. I screwed the hammer screw all the way in and tried to unscrew it by a quarter turn and it's still the same. My regulation is 150/115 bars...

...you...? Does anyone have any experience adjusting the SS hammer length of throw on a Wolverine R? If, yes, were you able to do it with the trigger installed - or do you have to disassemble and remove the rear cap to access the SS hammer adjustment (allen key into rear of hammer)? Thanks, -Ed

Need your help, AGN family. I recently received a Cricket 2 Smooth .22 and so far I'm loving it. Out the box it's shooting the JSB 18.1s at 964. I haven't really been able to test the accuracy due to my space limitations at home but I'm thinking that these may be flying too fast. When I've tried...

On a side note, is there any danger of turning the hammer throw adjustment screw too far in and have it come out?

You are not adjusting the hammer spring but the striker screw. It is more like a Benjamin Marauder where you shorten or lengthen the striker distance with the small screw in the hammer. You have to cock the gun and turn the hammer till you see the locking allen screw from the bottom. Loosen that...

I have always seen that hammer spring and regulator setting have to be balanced, but what if your gun doesn't have an adjustable hammer spring but has an adjustable hammer throw like my Daystate Revere?

ok i think i need to adjust my hammer spring now …

Trying to tune my new Zelos, but the hammer spring adjustment has me confused. The regulator pressure is set to 2000 psi, and with the screw adjustment for the hammer spring turned all the way out, I'm gettin about 905 fps with 21 gr Barracudas. As I turn the screw in (clockwise) velocity goes...

I’m not really familiar with that system never having owned one but I believe with hammer throw you would be essentially achieving the exact same “balance” as with adjusting hammer spring pre load. I believe more hammer throw will open the valve more. As you work reg pressure up hammer throw...

I’m thinking about getting one but the hammer spring adjustment looks to to be a major PITA on the tactical version. If the entire buffer tube and butt stock assembly is removed, it appears that the access to the hammer spring is pretty easy. I’m assuming I could just undo the castle nut to get...

The hammer is not automatic. P3 user manual says how to adjust it. I just read it. If it was automatic they wouldnt put a wheel for adjustments.

What pressure are you shooting at and what is your setting on the hammer spring adjuster?

I want to purchase a set screw to lock the hammer spring adjustment on my Marauder. Anyone know the thread size? Thanks, Don

Did you adjust the hammer spring? The hammer spring adjuster is usually at the the rear end of the air tube.

I know the problem, your hammer adjuster is loose. There is a small grub screw on top just before your stock attachment, the center one. It controls the spring and bb that notches into your hammer adjuster. When you shoot, it starts backing out and loses tension on the hammer adjuster allowing...