Search results for query: *

I already did that, but that mod is meant to cock it without opening the tube until the end. It will cock it at 90º degrees.

As title says: - cap and o ring for moderator - Original Edgun Moderator - Mahogany Grip - 3D printed grip - Original moderator baffles All this parts are based in Europe. PM if interested. Thank you

There's none...:-(

Hi to all, The trigger of my leshiy classic sometimes has a strange (and annoying) behavior. We (the classic owners) know that there's no such thing as a 2 stage trigger in the classic. But we all try to tinker with it to get the best performance. As I wrote, sometimes when I pull the trigger...

My Leshiy Classic proved the opposite. Original (exccentric) moderator worked poorly.

That's why you need an accessable regulator. NOT possible in this gun if you want to increase power/efficiency. This gun was designed for 12FP.

@MACTEN, sent you a PM.

They told me that the tool to remove the regulator cost 650€. So, it's not easy for sure. And if you want maximum efficiency it's necessary to access the regulator severall times. To much hassle, at least for me.

According to Air Maks the regulator IS NOT accessible. I believe this model was designed for the UK market where most of airguns don't do more than 12FP, unless you have a FAC.

I almost bought a Krait Lite, but knowing that is not possible to access the regulator, I stepped back. To achieved maximum efficiency you need the tinkering with the regulator.

I think this guy is trying to do that, but withou the digital stuff:

Ok, thank you very much.

He's a profissional lathe machinist but he is not a gunsmith. I have to give him your advices about the crowning.

I might try that. I have a friend with a lathe.

I will start with the brass screw, and then we'll see it... Thank you to all of you.

This barrel has never been a tack driver, BUT it's capable of some good groupings. Shall I do some crowning? Suggestions are accepted.

IIt's finished (at least for now. (but we all know it's never ending story)).😏

Testing...

3D printed parts arrived: Final assembly will follow during this week.