Search results for query: *

Thanks… the manual link should be a sticky… Bob H Tacoma WA

Thanks to a member on this forum I was able to view a schematic and gain the needed confidence to disassemble the rifle and see how things are attached. The stock screws, three of them, all different length, but are the same diameter and pitch. It is 6mm but a fine thread pitch. Not the more...

Thanks to a member on this forum I was able to view a schematic and gain the needed confidence to disassemble the rifle and see how things are attached. The stock screws, three of them, all different length, but are the same diameter and pitch. It is 6mm but a fine thread pitch. Not the more...

this is what I needed, thanks

maybe it can continue to live as a parts donor… or someone elae with one that can be parted out… sure there are a few out there no longer in operation

thank you for such timely info… happen chance would you know the spec on the screws on a RWS 54? going to a machinist supply store later and may just buy to replace the philip head screws… having a schematic will give me more confidence to take that thing apart

Hello, Just got an Anschutz Match Mod 220 rifle and discovered a bolt/screw is missing. It is the one directly in front of the trigger guard. Please see photo. I don’t know the name of this part. Anyone with an owner’s manual or schematic? Hopefully someone will know the size and thread...

Reviving this thread in hope to gain more information on this uncommon rifle. I just acquired one at auction Beautiful gun. Unfortunately a screw is missing. It is the one directly in front of the trigger guatd. Please see attached photo. Anyone with a schematic of this gun? Operator’s...

Thank you for this lead… appreciate the info.

I have a TX200 MkIII in .22. That airgun is the quietest of the 4 rifles I have. Backyard friendly as it is from the factory. Like JP said earlier, the sound of the pellets hitting the backstop is louder than the sounds of gun's muzzle report and spring action. Additionally, my TX barrel...

Hi... anyone with a source for replacement breech seals. Mine is synthetic, factory original from way back when. Gun purchased in 1985 in Germany and sat un-used for many years. Recently started shooting it again. Runs fine, but seems the velocity is inconsistent and seeing odd wear on the...

Hi All, I am looking for a vendor who can ship me a breech seal with a reasonable cost for postage. I am located in the US. The domestic source I found with the part I needed was AoA and they wanted to charge me almost $19 for shipping a $7 dollar part... yea... should have ordered it when I...

This listing has been renewed

Vortex Diamondback Tactical 6-24X50 FFP MOA. Have two and mounted on an AA TX200 (22) and a RWS 54 (.177). Use for FT and backyard practice.

Good sportsmanship goes long way in the shooting sport world… this is a good thread… great comments

So… I had the opposite experience… I shot my second FT match ever couple of weeks ago… used a RWS 54, kal 4.5mm, with 10.6 gr pellets, velocity last check was 875ish FPS. I was the only spring gun shooter that day… I shot the match with Dave B, our club’s Air Gun Director and the guy running...

You have a photo and source for this band? The size you used. I know Uncle Mike have several for tube magazine, like lever action PB guns. They have a range of fit for different variants.

had similar POI deviations issues when sling up tight on ARs without FF tubes..

will for sure give this option consideration… gun currently a the gun doc for an ouchie due to firing out of battery

Hi, I shoot springers and looking for solutions to use my powder burner optic mounts… keeping optic low is a desired outcome. Last but more importantly, it needs to hold given the effects of spring gun “recoil”… gun is a RWS54 (Diana AirKing)… any experience for that application?