Search results for query: *

I get why people don't want to publish their personal information, but putting your country/state is hardly personal.

Does the software let you begin with a standard drag model? If so you can compare your velocity and drop data to the calculated velocity and drop data, and where your data is different, begin increasing or decreasing drag coefficient at that velocity.

Sorting pellets sucks. But visual inspection for major issues and damage is the least sucky kind of sorting.

Yeah that's a seriously impressive score

And worth reminding: if you hook up a tank at 4500 psi to another at 3000 psi, the 3000 psi tank will end up over pressure. The amount of over pressure depends on the relative size of the two tanks.

If I ran my compressor an hour a day, I'd spend my annual fun budget on a really nice compressor and keep the YH as a backup.

I find that the 45s shoot better in my RAW than the 50s. Out to 100, good quality flight (no spiraling, consistent BC) means more than pure accuracy or BC. So any differences in the numbers as it relates to ballistic coefficient is dwarfed by actual BC coming off your rifle.

This listing has been renewed

Much less extensively. There's a lot smoother acceleration of the system and its easy enough to tweak the velocity.

In the beginning, 90% of your hit rate is determined by your technique, scope holdover setup and ranging, and wind doping ability. That leaves not much difference.

The best field target springers are HW77/97 or TX200. Well tuned Diana 54s are quite good if you don’t mind extra weight. I believe most competitors don’t attempt to reach 20fpe even if it’s permitted with the class rules. Even pcp shooters don’t make a serious effort to get real close to...

If I were you I'd start by looking for airgun benchrest competition in all of the states you are willing to travel to. The affiliation of those shoots will drive everything else. You definitely have to be careful on the equipment side. A 25y airgun benchrest gun in .177 will not be worth...

I just use Burris Signature rings everywhere I can, and where I can't, I lay a thin strip of plastic shim between the scope and ring.

IN

Strange I didn’t see that on the bkl website.

BKL double strap first came to mind but the rear mount is triple strap. No it’s not BKL. Definitely overkill for a PCP. A magnum springer needs double strap.

Just to confirm, the 800 and 1000 lines are supposed to be 2.365" apart when printed?

My club has a competition range we use for airgunning and when I'm recovered from my shoulder surgery I can run a few of these. I could do it at 25/50y and 50/100y. I have a couple of 18ft-lb .177, a 52 ft-lb .22, and a 73ft-lb .30 all shooting pellets. I also have a Labradar that can record...

A good point: I'm laid up now from shoulder surgery; its the best time to drain my tank and get the last hydro done in its official lifespan. David

Beeman has imported many brands at different levels of quality over the years. Comparisons firmly depend on which models. Glad you like your latest acquisition, welcome.