Search results for query: *

I just had a shooting session this evening with JSB 15.89 and 18.1 at 20 meters and I got a hole of 8 mm in diameter I think that is very correct. I am perhaps too demanding, then the shooter can also be at fault :o) I am however very satisfied with this PCP

Yes, I had to compensate for the short liner with a slightly higher pressure, which is logical.

Twist rate 1:24

No have 1 mm Space moderator /bottle

My second reg is at 110 bars I shot 16 gr on pw 4 on pw 7 im around 990 fps and have a 380 mm liner

after maybe the liner Fx expresses their precision at long distance…. But not try…

my Artemis p15 group as well or tighter with the original Chinese barrel :confused:

Yes, I have a chronograph and it's consistent with variations of 5fps. It's precise but not as much as my barrel cz... Everyone apparently swears by the liner Fx but I don't agree.

Hi I just bought an FX Maverick .22 and I'm doing some tests at short distances of 20 meters and my AA S200 CZ barrel makes much tighter groupings. I'm a little disappointed with my FX….i use jsb 15.89 in both with 850 fps for Fx and 790fps for the aa s200

I have just down to 110 bars , perfect at 930 fps with 16grn pellets at pw7 , I shot maximum 50 meters.

Problem solved. When you're stupid, that's how it is. I'm sincerely sorry, but this is my first FX, but despite that, I'm stupid because I was looking at the position of the pw at the top and not at the bottom... Thank you a thousand times for your help, and in the future I'll try to be more...

I had already taken everything apart to see if everything was fluid, but I will redo it with synthetic lubricant. I weighed my hammer at exactly 11 grams, I think that is a correct weight for a pressure of 90 to 130 bars?

I made the adjustments as you described. But unfortunately I end up with higher speeds in 1/2/3. It's totally inconsistent and incomprehensible, I absolutely don't understand the problem I'm having.

No problem Hogkiller, I'll follow your advice and adjust this more seriously.

I tried a setting today, pressure 160/125-130, here are the results: pw7:940 fps pw6:920 pw5:890 pw4:800 pw3:980 loud popping noise Pw2:980 loud popping noise pw1:980 loud popping noise What is my problem with 1/2/3 …. I dont understand.

I have 11 grammes hammer.

Ok Scotty I try tonight

Yes I degassing of course

I don't understand, when I set it to pw 7 each time, once my speed starts to go down, I say to myself it's ok, but no when I put it on pw1 the speed is even higher....

I set my pressures to 120/80 and 115/75 and whatever the pw position it's the same I have power inconsistencies and I noticed on high powers it's very noisy like a large quantity of air escaping