Search results for query: *

be great if you have time to give us some good pictures and a more through review. I have read some of your past posts and would value your opinion. thanks,

1900 colt says the extra interior piece is plastic on his new one so maybe it's no problem , yours was an older one from Joe B. , correct?

Sorry, do you mean you added a pressure maintaining valve or did you mean the filter already has one built in? How are you feeling about it so far? Are you leaving the charcoal in or subbing with MS? Is the internal section with the charcoal metal or plastic? If metal, does that present...

most of the gold filters have a plastic tube which holds the MS or filter material. I have heard that the filter material/MS should not touch the walls of the filter or any metal or it could ruin the metal. Does the filter material inside the new GX filter inside the inter tube touch metal and...

I think he said it didn't matter which tube went to which port as the cooling was the same. You could follow up on his thread/post . assume you saw the pictures.

check this out: https://www.airgunnation.com/threads/how-to-cool-a-cs4-or-cs4-i-even-better-than-just-bleeding-the-air-pocket.1329008/

did not reverse the air flow but the two water outlets are now on the side as opposed to the bottom

Nice work, how did you wire the analog hour meter? would love to see the nitrogen set up once complete Did you rotate the cooling fan as discussed in previous threads? there was some talk about the factory changing that after seeing the thread on this forum , seemed to be more efficient and...

Have you contacted GX directly? I hear they only communicate by e mail. Please keep us posted on this. Planning to buy one soon , this certainly creates doubts especially as this is your 2nd one. Thanks for posting.

Have you contacted GX directly? I hear they only communicate by e mail. Please keep us posted on this. Planning to buy one soon , this certainly creates doubts especially as this is your 2nd one. Thanks for posting.

Have you put much time on the Tuxing ? How is the reliability ? Obviously not going to be moving that one around very much?

Has that CS3 been pretty reliable for you? Over time?

I had read where some guys would fill their larger tanks at 20 minute intervals, rest the compressor for a time period in between. That's a lot of work and time consuming. Sounds to me like the CS4 and 4I should really just be used for filling guns. Saw the write up by GX that they backed...

I guess without knowing exactly how the water is channeled through the radiator, it is difficult to determine if the full benefit of the radiator is being used. The ports are fairly close together as discussed. I wonder if the GX folks would have any comments about that?

nice work , was it hard or complicated to rotate the radiator ?

it looks like you changed the water flow. In the original the hose that returns water to the top of the fill tank is now coming from the other port on the radiator ? Am I right about that? I guess it would not make much difference any way, correct? Can you comment on all of the water...

won't gx send you a new one?

wish you had a video of that !!

thanks

How far did you have to take it apart? Did you take any photo's share? thx. KB