Search results for query: *

Thank you for the insights. really appreciate it. Do you polish or oil to the rest of the parts that would improve the performance and the use comfort?

Does anyone know how to lower the regulator by roughly 5 bar? And what do you usually do to make the P35X feel smoother?

Hi, I recently purchased a Snowpeak P35X and noticed that the cocking lever is advertised as ambidextrous on the website. I would like to relocate it to the left side but have been unable to find any instructional videos on YouTube. Do you have any resources or could someone share their...

In your experience does the slug seating depth makes a difference?

It is and I replaced it too when I disassemble the gun.

I made sure that it's back to the original setting when I reassembled the gun.

Hi, I set up my FX Wildcat MK3 BT 22, 600mm slug liner to the max to try out what's the max speed to shoot different weight slugs. I maxed out the hammer spring preload to max until the gun won't cock and gave it a 1/4 turn in. I kept increasing the reg up to 160 bar or 170 bar (my gauge was...

Hi all, My .177 FX Dreamline comes standard with a 600mm barrel. I have a 700mm liner, and I'm looking just to buy the shroud, but most retailers are offering me a barrel kit. Do any of you know what the part number is for the 700mm shroud or the dimensions so that I can try to find a carbon...

Ya... I had a dreamline tact with 500mm barrel taht I sold a few years back to buy a wildcat mk3 bt. The reason that I'm buying the classic 177 is because of the 30% discount on clearance sale and I never have a classic stock airgun. And I have a 700mm slug barrel, a slug pin probe and 2...

My fx dreamline 177 with 600mm barrel is otw. I have a 700mm slug barrel and 2 plenums and i will install them. I want to shoot slug with good shot count, at least 2 mags. You mentioned that you might be shooting 20.5 gr NSA. May I know what's the reg pressure you are at and the result...

Hi. Do you have the measurement as a reference of where to drill the hole? And how large the drill bit should be? Thanks.

I forgot one thing. For the classic, I have to take out the gun out of the chassis to adjust the hammer. Is there a way to access the hammer adjuster without taking out the chassis? Thanks

I watched the 901 YouTube about adding second plenum doesn't do much to gaining power. Since I have two plenums. Wonder what the downside is if I install two more? I agree that FX Dreamline is not a powerful gun and the air tank is small anyway to get good shot count with hot setup. I'd...

Unfortunately it doesn't show the highest pressure....

Hi, I just took out the huma air reg for Snowpeak P35 to adjust the pressure. However, the label faded. Leaving me with no indicator where to set the regulator adjustment screw at. However, before i installed the reg, I marked the label of its lowest and highest pressure with a permenant...

Hi, I just bought an FX Dreamline classic 177 with 600mm barrel, which I will replace with 700mm heavy liner to shoot the heaviest slug possible, preferably the Zan or NSA 20gr. Also I have 2 power plenums. I know that the FX dreamline comes with 1 power plenum. What happens if I add 2 more...

On my FX heavy liner shooting slugs. I found that I got slightly better accuracy with clean barrel. So I clean my barrel by pulling just 1 dry patch every 100 or 150 shots. But it's not a magic number. I'm sure that some barrels perform well when it's dirty.

Hi @MongooseV8 , thanks for the tip. I'll try ot too.

Thank you so much for the offer. I really appreciate your generosity. Unfortunately I live in Indonesia, the postage would be very significant. But your good idea about upgrading the steel material is what I'll try to do with the help of a local machining shop. Although I doubt they can do a...

I see. I don't know how the size of the screw probe. Do you happen to know the size so I can buy right sized grade 8 screw? Thanks so much.