Search results for query: *

i believe you were re doing your cf on the barrel , ? if you got the cf just a little far on the breech end it may be holding the barrel from moving deep enough into the receiver and and not allowing you to get the correct tension needed for the cocking lever to snap shut and stay , . the...

my air arms 410 extra 22 has filled a truck bed with ground squirrels , 70 80 yds no problem !year after year it performed excellent ! and you know " ive never had a regulator problem ever ! no creep , no leaking , no adjustment problems , it never needed rebuilding , just enjoy problem...

750 was clearance price !

just did this to my friends boss . they all have a valve , but if you want a carbon fiber bottle there is some wood work involved because the bottle sets deeper in the gun than the steel bottle . " bout a half inch deeper , you can get a bottle on ebay for around 115 and the valve can be...

he was the first guy with guts enough to sell them , i bought a few from him , you had to then go to best fittings to buy a slip on collar to fit your barrel size, im looking also for a friend and cant find anything here in the US

all mrods switch over to left hand . i believe pa offers the service for 20 bucks around there, or you can do it your self

id save my money for the m6 after the m 5

i just want to put a cf bottle on this thing , i dont have a valve , i thought i was going to take the valve out of the aluminum bottle thats stock on the gun and install it on the cf bottle , , can i just unscrew this bottle off and screw the new cf bottle on ? did they glue a fitting into...

i have a project this weekend swapping out bottles , i thought i was removing a valve from one bottle and installing it in the cf bottle , i guess I'm unscrewing a empty gun and screwing on a new bottle ? didn't know there wasn't a valve in the old aluminum bottle the older boss came with...

if FX the royal line is probably the gun that will have value down the road . solid barrel and accurate, in 15 years a old crown or impact etc , will have a issue and no one will want to work on it . you will probably be stuck learning more about how to work on it than you ever wanted , and...

airgun history is awsome ,

Scott " motorhead " is a guy that works on them , tunes them as well

sometimes you just want the hubcap and not the whole wheel

i call them ( COLD AIR HUSH FILTERS ) can those be sold still ? at some point i may need one of "those" in the future !

My mrod with a extended aluminum tube

its good to have a "non regulated air gun" a couple parts you can get that will work good with non regulated is a "stopping spring guide " SSG" JSAR has one , and the twin spring system " basically its a good adjustable end cap that works with the SSG very well , just use the factory...

if your talking about the polymer transfer port from tim hill , if you pull the gun apart just leave it alone and dont take it out and it usally goes back together just fine , but they are not enough money to not change if you want to make sure it wont leak

that sweet 16 .... what a sloppy mess ! a thousand bucks of trash , and that was about 15 or so years ago, i gave mine away for free soon after i got it ! and special thanks to Scott "motorhead" for guidance on my BSA gold star se , couldent find or figure out how it came apart . i was...

ya i want one !!! ive been dreading the rebuilding of the old one , and the gun is Extremely accurate . i already did a v block so i can fill the thing and have a gage and a 480 cc bottle