Search results for query: *

For what it's worth...buying ANY...air gun is drawing from a lottery !!!!!!!!!!!!!!!! Leakage, mis-machined parts, bent, broken, etc., etc. I just bought a semi-expensive (much more money than your Reign) gun. First fill, it leaked to "empty" in a day and a half. It continues to leak 6 or 7...

NOTE...a "plastic" grip frame is...NOT a good idea on this gun. With all of the "small" screw locations, thread stripping WOULD...be a problem. I did ask the Skout guys a week or two ago about the EVO grip with the electronic readout panel being on the left side grip would work on the Epoch...

Depends on "where"...you want to put it ! 1 - I use Lucas Gun Oil (red or blue) on all moving (sliding, rotating, etc.) parts like the trigger release mechanism and cocking arm pivots. Also on some threads. 2 - I use silicone grease OR oil (RC car shock oil) that is on parts that are near...

I don't understand these silly questions. O.P., just how old are you ? This seems like a 12 year old's question. Or a bunch of folks around a table that have had too much alcohol to drink. Seems they are of no use or benefit to anyone, but to waste bandwidth. Mike

Now...mask of the scope lenses, and anything else that "shouhldn't...be painted, and do the whole gun. Scope, the rest of the barrel covers, the stock, etc., etc. Nice work. Mike

I have both the full sized, V1, Prophet Performance and the Compact version, both in .22 . 1 - Magazine sticking up. No problem. It rotates from side to side, so it's basically ambidextrous, and NOT in the way of your face. 2 - Sharp edges. Yeah, but the only area that bothered me "was" the...

That wasn't so hard...! They didn't fix that TINY...pressure gauge though. Thank you. Mike

Yeah, it slides over the angled sections of the Picatinny rail. You bought the one with the large nut on the right side right ? Just make sure that the nut is far enough unscrewed, to allow the lock plate to slide over the rail. You may have to remove the nut, and the lock plate, place the...

And so...some of these improvements include.....? Mike

Give the "Search" function a try... That'll give you some reading on the subject..! I try to keep mine just above the regulator setting. Normally in the 90 to 120 bar range. Skout says they like you to keep their guns (Epoch, Evo) "empty" during more that a week or so storage. Too much...

NOT...really a "carbine kit". More of a "shoulder stocked" pistol ! A "carbine" is a short rifle... Mike

First guess...correct. The US had to get various, "non-aerospace" companies to buy it (lots of it). No way that they would sell to an aircraft manufacturer at the time ! Mike

First guess...correct. The US had to get various, non-aerospace companies to buy it (lots of it). No way that they would sell to an aircraft manufacturer ! Mike

Nicely engraved. Do you know WHERE...all of that Titanium came from ? No fair using the interweb.... Mike

That was one of the first ones that I bought, so yes, I do have one like that. And yes, it is sorta large. I'd imagine that you could come up with a smaller nut to put there to help with the holster fit. This one is the smallest footprint that they have (I have two) -...

A heads up on the SeeAll. I don't know which retical you bought, but it takes a little practice to be able to get the "center point" (top of delta or cross hair center) of the reticle at the top of the front window, and be clean and sharp. Once you figure that out, they are pretty nice. They...

Also a MUCH nicer stock, than the Bullshark has (not...Bulkshark !) too. Mike

Give the "SeeAll" sight a look. It's short and mostly unobtrusive. They have a few different models. My AP16 with one - Mike

I'm betting, that those laser grips are one of the..."odd" ones that I mentioned above. While they will probably "fit" the grip frame, I'm betting that the air cylinder sticks out too far, and will in the way of the beam. As I recall, those laser centers are fairly close to the frame of the...

Cool... As a reminder, any normal (some oddballs may not), 1911, "full size", grip is a bolt on. Mike