Search results for query: *

anything for this press, too? supposedly a LEE CHALLENGER.

what is the right direction on the HP version? i tried pulling the regulator out with a long 4M screw that was screwed into the brass set screw, that would be in muzzle/bottle direction. to spread the extra lube that i have applied i was able to turn it and i guess that broke the o-rings (on...

thank you all for your responses. they are helpful to me.

This is what i think must have happened, not by the threads, but by sharp edges of the borehole inside the tube. because before i tried to pull it out, but was only able to turn it in the tube. so i guess, as others have said here as well, that the external o-rings were damaged. damn, that is a...

thank you all for your quick responses. they are helpful to me.

Hi everybody, my AGT VULCAN 3 HP sprung a leak, after degassing and while refilling. air slowly, but audibly escapes from one of a little boreholes on the plenum tube. there are three boreholes, the leaking one is on the height of the regulator, the one in the middle. has anybody a clue what...

Hello everybody, in my compressor the gauge does not return to zero when there is no pressure on the line. So it is a bit off (it shows 80bar, when there is no pressure), which of course leads to an early shut off, below 300bar. (which i can see from several tank as well as gun gauges.) since i...

i did it like this on my GK1 quite a while ago and the off center drilling is to create a cavity for the slightly protruding degassing(?) on top of the block.

That sounds like the reasonable and sane thing to do. =)

THIS!

thanks, i have no way to test it, so it might all be just glitches. got even higher numbers on a few shots recently...so maybe the chronograph is junk.

how much did it cost including the shipping and custom ransom?

this is interesting. and let me state, this is not in any way a judgement, but i am really curious what the appeal to this color is? what are the associations?

well, that is really annoying. keep us updated, if or how you solve it.

would you please explain how you do that, i have no reg. tester and so far have been flying pretty bling with it, and still am trying to find a reasonable tune for the ammo i want to use. sorry to read, that you are still struggling with the rifle. i do not think anything i can say would be...

thanks, i've been trying to inform myself about casting routines and what to watch out for and also what causes what problems, so it was too much of an trial and error process for myself. with the hollowpoints i was actually quite surprized that they dropped so easy. i was expecting worse. for...

hi @sonnysan, thanks for the comment and tip. yes, i am aware of the 'finned' projectile, i realized too late that there was tiny lead splinter in between the molds sealing surface and so the whole lot of 8 slugs were lost. i later sorted them out, but wanted to show my true results. i've not...

i think that is literally TOO kind of Wes. the fault lies somewhere else...

when sized to .252 with the MP sizer they are a perfect fit for the mag. but i have just shot one mag for testing 'the feel', without any measures and only with a red dot on 15-20m distance with a stock, seemed similar than my results with other projectiles, but i will make better tests in the...

casted slugs for the first time. i've used a recommended NOE boattail and ended up with 66.6gr. they fit tightly, so cocking is a bit harder than usual, but i got much better results power-wise, but not i have to tune the gun properly for these. besides getting my ears ringing (supersonic!) i...