Search results for query: *

I guess those Zan's at 150bar are going 960-980fps? .33gr .217 or .218? Las week I orders some .217 33gr zan, seen some threads that day Zan's should go minimum 970fps, top 1040fps....will have to try out to see

what reg pressure is sweet spot for 1040 fps for 38-40gr on a 700mm

Rifle now ready....thanks all for the replys and comments, Problem solved!

I read old post from this forum, and it leaked because it had no air on plenum and i changed the hammer spring, so i installed the tank and just cocked the rifle, and it stopped leaking air.... air made pressure oin plenum for it to close correctly.

i already removed ir with small taps with brass stamp, it made a small "pop" sound when it got unstuck, I already installed hammer spring. orings on barrel seem loosen, dont know if they are damage or not.... not that I assembled everything, I put the air tank on and air leaked from barrel :(...

I already did everything is just the barrel shroud I already removed barrel and carbon fiber liner, I never use locktite

I already tray hit several hits with a brass puncher and it's locked in tight

Barrel stick stuck, I have already remover saber tactical rail and screw and still barrel doesn't come put

I already did that

I will lossen up the saber tactical rail screws and install again I'm like 90% sure it's that.

Need help removing stuck barrel....I already removed grip screw and barrel won't come off.I have Saber tac top rail installed, was maybe wondering that some tops rail screw might be to tight. But don't want to be messing around

This week I'm gonna put 8" gong 250yds and a 8" and 12" gong at 300yds...I'll post later this week maybe video see how it does with 38-40gr. Just will try find sweet spot on fps

im gonna try with HN 30 and 36gr .249 and see from there just ordered...right no im just shootgin jsb 33.95

which speed do 38gr 218 handle good precision????

Tungsten hammer weight

Justed ordered 38-40gr h&n in 218, don't know if try put zan 33gr and 40gr what do you think? My goal is just to have good 150-200yds shots for hunting, cause I shoot almost daily now have home shooting range up to 300yds I have my m4 700mm 1:16 barrel Carbon liner FX slug kit(tungsten hammer...

Have you tried on .22 which bullet weight works best?

Any other recomendación, I have impact M4 700mm .22 with all market available stuff for slugs, have tried .218 34 but want to try something faster what do you recommend

Ok, perfect ... tomorrow i will install the huma air hammer spring....right now I'm at 180reg pressure with huma regulator I think it's more than enought, lets see what does the new spring does and go from there

What's slugsdo you recommend on .25 with rogue slug kit which I will be installing this weeek