Search results for query: *

There have been numerous posts regarding nitrogen for PCPs. In an attempt to learn additional information, I checked the local suppliers in my area. This is what I have found: There are five grades of nitrogen available. Which would be most applicable for filling a PCP? Any input would be...

I have been using Warne quick detach rings on my centerfire rifles and now my airguns. They are light but solid and the locking lever can be rotated to any position once tight.

For testing various settings on the Lelya, I use a bipod. My home made adapter is a piece of 5/8 inch wood dowel and a strip of wood to fit the 2 inch magpul rail. Using a 5/8 spade bit to put a hole in the wood strip, the dowel can be secured with good old Gorilla Glue. Two flat head wood...

So, when can we have one for the Lelya/R5m?

As an owner of a Nomad II, I would say the Nomad II is a nice little piece of equipment (when it is working). Would I buy it again? NO. First, it is overpriced. Second, when it fails, the shipping to the manufacturer is expensive, I have not found any information in regards to owner repair...

Thanks for the reply. If memory serves me correctly, the factory setting for the reg is 120.

Well done! If I might ask, what is the reg setting on your Lelya and what FPS are you getting? My .25 is set at 130 and I get 880 fps with the JSB MkII heavies. The hammer spring is wound up quite a bit and I am starting to wonder if it might be too much for the valve stem.

I have been finding that the point of impact is much louder then my guns, anybody know how to make a silent backyard friendly target to go with those super quiet moderators. rangur1 thank you for the info. Using a DonnyFL Koi on .25 Wildcat II, the sound of a taget hit is louder than the shot...

Thank you. Tried to get that info from AV but could not get an answer.

Any Nomad II owners using a "stand alone" deep cycle battery to power their unit instead of hooking up to a running vehicle battery? Just wondering; what ah rating is being used and if there is any possibility of damage to the Nomad.

I just had to go there! https://www.walmart.com/ip/Adventure-force-alpha-rogue-bolt-action-blaster/142980317 Now if only Huma will make a regulator and manometer and Donny a moderator. Thank you AGD. With Giles at Airgun Gear Show rather quiet lately, I needed some humor. ...

Will do that. Have not seen any intel on that problem. I thought it was just my old "family curse" again!

Recently purchased two identical Huma manometers (28mm) from a reliable dealer. The first one leaked air around the case/lens and the second one hangs up at 150 bar. I can get the "hanger" to read true most of the time by flicking the side of the housing. Not something that should have to be...

I have an Athlon 4-16x44 on my Lelya. Only minor complaint is it seems a bit on the heavy side. In my case, the extra weight helps counter my unsupported shooting which does not come anywhere close to "rock steady"!

I have/had a Nomad II. Used it twice to top off the Wildcat II compact. Two fills under 1000 psi each and run times of under 5 min. each time over a period of several days. Followed the directions on every fill. On the third fill, fans came on, compressor ran, no air! Called AV and was told to...

Thank you Chuck. I believe the 140 reg pressure mentioned in most of the posts is for the Wildcat and Wildcat Mk II. The 150 reg setting on the compact would probably be due to the shorter barrel?

I have been following any post I can find on the FX Wildcat. The ones I have found appear to be for the regular Wildcat, not the compact version. The factory regulator on my Wildcat compact in .25 would drop reg pressure (low velocity shot) if left sitting for a day or two, I could not find...