Search results for query: *

Green gray laminated

Thanks yes they both go thrue it, the eliminator easy with 285ms with ftt.

Hw90k .25 Pellet ftt 20.06 No dieseling

Little back yard shooting Distance 15m 50feet Target 28mm wood. Pellets hw90k .25 ftt 20.06 Eliminator .22 ftt 14.66 Yust fun to see if they shoot thrue it.

Its all about the peak pressure wave, when the pressure is at max in the compression stroke. When the pellet break loose pressure drops fast. Then if the piston is fast and have not spend all the air the wave holds on little longer to allecerate the pellet true the bore. Its a fine art between...

Yes hw must pick up in the springer gun market. Im emailed them long time ago. To asked them to make a high power breakbarrel / underlever gun. Based on theoben elimanator/ beeman crowmagnum. Its have a 31.4mm piston and 100mm stroke length. Tp is 4mm and lenght 6mm At 65 bar rampr. Its does...

Hw90 30x85mm

Red aussie seal Tp 3mm 22bar ram pressure Slow burn dieseling youre not see smoke when shooting. Im bought it so,

Im back to oem seal its fits way to tight. Tp port is 3.4mm and fps dropped alot. 720fps 210ms Im look for a good cup seal vortek. The red aussi cup seal do good buth its slow burn dammage.

These new piston seals are 34.8mm Thats way to for mine eli they are 34.4mm. Im thinking you must make them fit

After fitting the new cup seal and drill the tp to 3.4mm power dropped to 205ms 20gr pellet. Even it have a 90mm stroke. Looks like the tp size to big and lost its peak pr wave. The red aussie seal have a bit of slow burn damage on it. Thats cause higher peak pr with 3mm tp. Not sure what to...

Time ago boght a major f .25 Its was rubbisch. It didnt get the vo specs by miles. Shot 100+m/s below spec with 20.06 gr pellets. When opening it, full of grease. Piston seal wash good. The demension of airchamber where 25-26mm diam. By 100mm stroke. Way to small to get a .25 pellet around...

Im fixed the barrel play, the old pivot bolt the thread bit to short to close the play. Lucky im have the right cutter so cut few more on it. Now its tight zero play.

So based on Tanus, they use the HE system. How are they to shoot

These are very nice airguns, The rws ra-800 by the looks at its build by theoben ? What model theoben they used?

Im have a theoben eliminator mk4 Now im found that the barrel breech have side to side play. When i removed the barrel it have dish shape shims. Im installed the right. After turn the pivot bolt tight it have still side to side play. Maybe its normal for theoben breakbarrels.

Thanks a lot, just fideling around. The snapp sound is now bit less. Only 100mm of silencer is working.

Some pictures, Its full 500mm barrel the silincer im made it push over style 100mm internal

Yes beeman r1 tested the interchange tp size. Im go small steps tp drill to 3.2mm New notex piston seal. Agr youre say TP 3.5mm for mine hw90